Nottinghamshire · England
Bath Re-enamelling for Warsop Vale homes
Problem with your bath in Warsop Vale? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
How we handle bath re-enamelling in Warsop Vale
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. We work on cast iron baths, basins & shower trays and acrylic baths, and people most frequently call us about an outdated colour you’d like to change and an old resurfacing that’s failing.
Every job is backed for twelve months in Warsop Vale and everywhere else. We return to put right any problem with the work.
- Location
- Warsop Vale (NG20)
- Area hub
- Nottinghamshire
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
To keep it looking its best:
- A dripping tap should be fixed promptly
- Don’t let dyes or oils sit on the finish
- Have chips seen to early
- Stick to gentle, non-abrasive cleaners
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Also near Warsop Vale
Other services in Warsop Vale
Should you replace it?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- One-year guarantee on every repair
- Colours mixed by hand to suit your surface
- No extra charge for your area
- Free fixed quotes from pictures
Read our pricing or guide to resurfacing and replacement costs.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Problems we can’t see until an old finish comes off
- A bath split right through the body
- A bath that is rusted through
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Warsop Vale
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Our work in Warsop Vale
Warsop Vale is about 3 miles north of Mansfield Woodhouse, in Nottinghamshire. We travel to clients in Warsop Vale, so nothing has to leave your home. Warsop Vale is one of 329 towns and villages in Nottinghamshire we cover. We work right across the region, from Warsop Vale to Leeds (about 44 miles away).
Every address in NG20 is covered. Local streets include West Street, East Street and Hewett Street, all of which we cover. We also travel to Market Warsop (1 mile east), Church Warsop (1 mile north-east), Meden Vale (2 miles north-east), Cuckney (2 miles north-east) and Norton (3 miles north-east). Further out, we also cover Mansfield (4 miles south), Worksop (8 miles north), Sutton in Ashfield (6 miles south-west), Hucknall (12 miles south), Retford (13 miles north-east) and Mansfield Woodhouse (3 miles south).
What’s near Warsop Vale
Locally, our jobs take us to homes close to Meden School, St Augustine's Church and Church Vale Primary School and Foundation Unit and the streets around them. The nearest railway station is Shirebrook station, roughly 0.9 miles west. Nearby you will also find Budby Castle (4.7 miles east) and Bolsover Hospital (4.4 miles north-west). The countryside around Warsop Vale includes Budby South Forest RSPB reserve.
- Local facilities include Norton and Cuckney (2.6 miles north-east)
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- What kind of damage it is
- The material and finish
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send photos for a quote
You can typically get a fixed price without us visiting. To help us price it:
- Natural light rather than flash
- What it’s made of, if you know
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know if it has been repaired before
- Make sure the area is dry
- Have a window or extractor fan available
Getting a price
The quickest way to a price is to send a couple of photos through our quote form or call us. We will say straight away whether it can be repaired.
Related advice
FAQs for Warsop Vale
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your NG20 postcode.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Common problems we fix in Warsop Vale
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Common reasons people in Warsop Vale contact us are:
- Chips and rust in more than one place
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
- A coloured bath you want in white
What your quote should include
- How soon you can use it again
- Who will actually do the work
- What the guarantee covers, and for how long
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
