Gloucestershire · England
Bath re-enamelling & resurfacing in Milbury Heath, Gloucestershire
Bath re-enamelling in and around Milbury Heath: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Bath re-enamelling at your home in Milbury Heath
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Typical jobs include a roll-top that’s seen better days and a bath in a colour that no longer suits, in pressed steel baths, cast iron baths and acrylic baths.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Milbury Heath (GL12)
- County
- Gloucestershire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Milbury Heath
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Milbury Heath and the surrounding area
Milbury Heath is about 1 mile east of Thornbury, in Gloucestershire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We cover all 470 towns and villages across Gloucestershire. You can also see our page for Birmingham, about 65 miles away.
Postcode districts we cover here: GL12. Close by, we cover Buckover (1 mile north), The Hacket (1 mile west), Townwell (2 miles east), Heath End (2 miles east) and Sundayshill (2 miles north). We also work in nearby towns such as Stroud (14 miles north-east), Lydney (8 miles north), Cam (8 miles north-east), Stonehouse (13 miles north-east), Dursley (8 miles north-east) and Tetbury (14 miles east).
Around Milbury Heath
Typical jobs here are in homes near Crossways Junior School, St Paul's and The Castle School, among other places. A little further out are Thornbury and District Museum (1.7 miles west) and Thornbury Castle (1.9 miles west). Open spaces near Milbury Heath include Red Hill.
How it works
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. You can expect it to take a full day, and we will keep you posted as we go.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
How to get a price
If you’re in Milbury Heath and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Repairing versus replacing in Milbury Heath
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Milbury Heath clients choose us
- One price list for the whole UK
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
Read our full price list and bath cost comparison.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- A bath that’s rusted through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Also near Milbury Heath
Also in Milbury Heath
Questions from Milbury Heath
How much does bath re-enamelling cost in Milbury Heath?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your GL12 postcode.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
What information do you need?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Keep suction mats out of the bath
- Do not leave a chip unrepaired
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we are called out for in Milbury Heath
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
People typically call us when they notice something like this:
- Enamel that’s lost its shine and feels rough
- An old resurfacing that’s failing
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Comparing quotes
- How to look after the finish
- The length of the guarantee and what it covers
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
