Gloucestershire · England
Bath Re-enamelling for Sundayshill homes
We travel to Sundayshill for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
Bath re-enamelling in Sundayshill, done in place
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We work on cast iron baths, acrylic baths and basins & shower trays, and people most often call us about a peeling or bubbling previous coating and brown or grey marks that don’t clean off.
Big or small, you get the same one-year guarantee in Sundayshill and across Gloucestershire.
- Location
- Sundayshill (GL12)
- Region
- Gloucestershire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
How the surface is treated afterwards matters:
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Repairing versus replacing in Sundayshill
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
- We leave the room as we found it
- Free fixed quotes from pictures
Read our full price list or resurfacing vs replacement cost guide.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Common problems we fix in Sundayshill
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
Comparing quotes
- What protection goes down before work starts
- What happens if the damage is worse than the pictures show
- Aftercare advice
- Is the price fixed, and does it include VAT?
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- The type of damage
- Doing more than one item at once
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- A coin or ruler next to the damage for scale
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
What else we do in Sundayshill
Our work in Sundayshill
Sundayshill is about 3 miles north-east of Thornbury, in Gloucestershire. From the centre of Sundayshill to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Sundayshill is one of 470 towns and villages in Gloucestershire we cover. Our jobs stretch from Sundayshill to Birmingham (63 miles away).
Our visits in GL12 are booked in the same way as anywhere else. We also travel to Falfield (1 mile east), Moorslade (1 mile north-east), Lower Stone (1 mile north), Stone (1 mile north-east) and Buckover (2 miles south). Further out, we also cover Stroud (13 miles north-east), Quedgeley (15 miles north-east), Lydney (7 miles north), Kingsway Village (15 miles north-east), Cam (6 miles north-east) and Stonehouse (11 miles north-east).
Local landmarks in Sundayshill
Typical jobs here are in homes near Church of St George. Other landmarks nearby include Thornbury and District Museum (3.2 miles south-west) and Thornbury Castle (3 miles south-west).
How the visit works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Open a window if you can
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
Questions from Sundayshill
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we will ask for another angle.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Do you cover Sundayshill?
Yes, we do. Repair technicians travel to Sundayshill from across the region, and the price is the same as everywhere else.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Sundayshill, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
About our accreditations · Every repair comes with a one-year guarantee.
