East Sussex · England
Bath re-enamelling & resurfacing in Mill Corner, East Sussex
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Mill Corner. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Lots of chips and rust spots
- A dull, rough surface that won’t come clean
Bath re-enamelling at your home in Mill Corner
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We’re often asked to fix an outdated colour you’d like to change and a bath that stays dull however much you clean it, across basins & shower trays, pressed steel baths and cast iron baths.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Mill Corner (TN31)
- Area hub
- East Sussex
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Mill Corner
Mill Corner is about 8 miles north of Hastings, in East Sussex. Anywhere in TN31, a technician comes to you. Mill Corner is one of 289 towns and villages in East Sussex we cover. Our jobs stretch from Mill Corner to London (47 miles away).
Jobs in TN31 are booked in the same way as anywhere else. Neighbouring places we cover include Snagshall (2 miles west), Staplecross (2 miles west), Cackle Street (3 miles south), Cripp's Corner (3 miles south-west) and Brede (3 miles south). Within a short drive, we also cover Hastings (8 miles south), Bexhill-on-Sea (11 miles south-west), St Leonards (9 miles south), Hastings Old Town (9 miles south), Belmont (8 miles south) and Heathfield (15 miles west).
Near you in Mill Corner
Our clients here include homes close to Northiam Church of England Primary School and Hayes Arms Hotel. The closest station to Mill Corner is Doleham station, about 4.3 miles south. Green spaces nearby include Flatropers Wood.
Repairing versus replacing in Mill Corner
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Fixed prices from your pictures
- Most jobs done in one visit
- Colour mixed on the day to match
- We come to you, anywhere in the UK
Take a look at our full price list or resurfacing vs replacement cost guide.
What we do, step by step
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It normally takes most of the day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know which floor the room is on
- Ensure the area is dry
- Plan for the room to be out of bounds to pets and children
Ask for a price
You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Do you need bath re-enamelling in Mill Corner?
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Clients usually contact us about:
- A bath in a colour that no longer suits
- Several chips and rust patches
- Wear marks under the taps
- A bath that stays dull however much you clean it
Before booking anyone
- How to look after the finish
- Whether there are any call-out or travel charges
- What preparation is included
- What the guarantee covers, and for how long
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Landlord and trade work in Mill Corner
Landlords, letting agents and housing providers in Mill Corner use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Towns and villages near Mill Corner
Other services in Mill Corner
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Leaks from fittings rather than the bath
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
Send us photos and we will tell you honestly.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Common questions in Mill Corner
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your pictures and you’ll get one combined price.
How do I get a price for bath re-enamelling in Mill Corner?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up and a picture of the entire item with your TN31 postcode.
When can you do it?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Do you work in Mill Corner?
We do. Repair technicians travel to Mill Corner from across the region, with no extra charge for travel.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
