Walsall · England
Bath re-enamelling & resurfacing in Mill Green, Walsall
We travel to Mill Green for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- Worn patches where water runs and sits
How we handle bath re-enamelling in Mill Green
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on pressed steel baths, basins & shower trays and Victorian roll-tops, and people most often call us about worn patches where water runs and sits and an original cast iron bath that needs restoring.
All of our repairs are guaranteed for twelve months in Mill Green and everywhere else. If something goes wrong with the work, we come back.
- Area
- Mill Green (WS9)
- County
- Walsall
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Mill Green
Mill Green is about 1 mile east of Aldridge, in Walsall. Across the WS9 area, a technician comes to you. Mill Green is one of 39 places in Walsall we cover. We work right across the region, from Mill Green to Birmingham (about 9 miles away).
Jobs in WS9 work the same way as everywhere else we cover. That includes homes on Fotherley Brook Road, Chester Road and Aldridge Road and the roads around them. We also cover the places around Mill Green: Thornes (2 miles north), Stonnall (2 miles north), Lower Stonnall (2 miles north), Footherley (2 miles north-east) and Shenstone Woodend (3 miles north-east). We also work in nearby towns such as Walsall (4 miles west), Willenhall (6 miles west), Bloxwich (5 miles west), Brownhills (3 miles north-west), Caldmore (4 miles south-west) and Pelsall (4 miles north-west).
What’s near Mill Green
Around Mill Green, we work in homes near Church of St Peter, St Francis of Assisi Catholic Technology College and The Old Irish Harp Public House, among other places. For rail, the closest station is Blake Street station, roughly 1.8 miles east of the centre. Other landmarks nearby include Kingstanding Shopping Centre (3.5 miles south) and Walsall Castle (4.9 miles west). Not far away are Bourne Pool and Barr Beacon.
Landlords, agents and businesses in Mill Green
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What affects the price in Mill Green
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- The colour and finish to match
- How many areas need work
- Any earlier repairs that need removing first
- What kind of damage it is
We charge the same wherever you are, so there is no premium for Mill Green. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from photos
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- Natural light rather than flash
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.
Questions from Mill Green
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
How much does bath re-enamelling cost in Mill Green?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
How long does re-enamelling take?
Typically one day, with the bath ready the following day. A badly pitted bath can need a second day.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Nearby places to Mill Green
What else we do in Mill Green
How to care for the repair
Once the work has cured, treat it gently:
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Have chips seen to early
- Repair dripping taps early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
The process
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
Getting a price
If you’re in Mill Green and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
Signs you need bath re-enamelling in Mill Green
Often the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
These are the problems we are asked about most:
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Before booking anyone
- Whether they match the colour on site
- If travel is included in the price
- How long it needs to cure
- What happens if they find more damage
About our accreditations · Every repair comes with a one-year guarantee.
