Greater London · England
Bath Re-enamelling in Mill Meads
Damaged bath in Mill Meads? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
Where we work around Mill Meads
Mill Meads is about 1 mile south of Stratford, in Greater London. Customers in Mill Meads get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Mill Meads is one of 764 towns and villages in Greater London where we work.
All of E3, E15 and E14 is covered. Whether you live on Gay Road, Bruce Road and Edgar Road or a nearby road, a technician can come to you. Neighbouring places we cover include Three Mills (1 mile north), Bromley (1 mile south-west), Old Ford (1 mile north-west), Bow (1 mile west) and Bow Common (1 mile south-west). Further out, we also cover London (4 miles south-west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (9 miles west), St Pancras (5 miles west) and Shoreditch (3 miles west).
What’s near Mill Meads
In Mill Meads, that means homes near St Mary's Church, Bob's Park and London International School of Performing Arts. Nearby too are Manorfield Primary School (within half a mile west), Rose and Crown pub (within half a mile west) and East London Science School (under half a mile east). Mill Meads’s nearest station is West Ham station, about 0.5 miles east of the centre. Well-known places in the area include County Borough of West Ham (1 mile north-east) and Stratford Centre (1 mile north). Not far away are Hollow Pond and Old Ford Island.
About our bath re-enamelling in Mill Meads
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We’re frequently asked to fix a bath that stays dull however much you clean it and a coating lifting around the plughole, in pressed steel baths, basins & shower trays and Victorian roll-tops.
Big or small, you get the same one-year guarantee.
- Location
- Mill Meads (E3, E15, E14)
- Area hub
- Greater London
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- The material
- How much damage there is
- Doing more than one item at once
- How easy the damage is to reach
Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send pictures for a quote
Photographing the damage takes a minute. Try to send:
- The material, if you know it
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
Most customers in Mill Meads get their price from photos. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Repairing versus replacing in Mill Meads
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Why book with us
- Most jobs done in one visit
- We leave the room as we found it
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
See our prices page or guide to resurfacing and replacement costs.
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
When to call us in Mill Meads
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
You may need us if you’ve spotted any of these:
- A peeling or bubbling previous coating
- A coloured bath you want in white
- Brown or grey marks that do not clean off
- A roll-top that’s seen better days
Before booking anyone
- Who will actually do the work
- What happens if the damage is worse than the photos show
- What preparation is included
- Whether they match the colour on site
Your questions about bath re-enamelling in Mill Meads
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your photos and you will get one combined price.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you resurface freestanding baths?
Yes. Inside and out.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Towns and villages near Mill Meads
What else we do in Mill Meads
Keeping it looking good
Nothing complicated is needed:
- Do not leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What we cannot put right
Some jobs aren’t right for a repair, including:
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
