Glasgow · Scotland
Bath re-enamelling & resurfacing in Millerston, Glasgow
Full bath re-enamelling and resurfacing for homes and businesses in Millerston and across Glasgow. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Bath re-enamelling at your home in Millerston
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the whole bath is tired rather than one spot. If you are dealing with enamel that’s lost its shine and feels rough and a period or roll-top bath worth keeping, we can generally put it right.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Millerston (G33)
- Area hub
- Glasgow
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Millerston
Other services in Millerston
Where we work around Millerston
Millerston is about 2 miles south-east of Bishopbriggs, in Glasgow. We visit customers in Millerston and nearby villages, so nothing has to leave your home. Our technicians cover 183 places across Glasgow, from the larger towns to small villages.
Here we cover the G33 postcode area. Local streets include Comrie Road, Station Road and First Avenue, all of which we cover. We also cover the places around Millerston: Hogganfield (1 mile south-west), Craigend (1 mile south), Robroyston (1 mile north-west), Stepps (1 mile east) and Ruchazie (1 mile south). Larger places within reach include Glasgow (5 miles south-west), Hillhead (5 miles west), Dowanhill (5 miles west), Woodlands (4 miles west), Woodside (4 miles west) and North Kelvinside (4 miles west).
Near you in Millerston
Locally, our jobs take us to homes close to Stepps and All Saints RC Secondary, among other places. Millerston has its own railway station: Robroyston station. Nearby you’ll also find Bedlay Castle (3.1 miles north-east) and Glasgow Fort (1.5 miles south-east). Open spaces near Millerston include Lenzie Moss and Hogganfield Loch.
What affects the price in Millerston
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- The colour and finish to match
- How many areas need work
- How many items we do on one visit
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- The material, if you know it
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
Upload photos of the damage and one of the entire item, with your G33 postcode, and we’ll reply with a fixed price.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What we do, step by step
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a full day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
How to prepare
- Clear the area around the damage
- Let us know if it has been repaired before
- Open a window if you can
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- Repair dripping taps early
- Do not leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
When to call us in Millerston
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Typical reasons for a call-out include:
- Worn patches where water runs and sits
- An old resurfacing that is failing
- Lots of chips and rust spots
- A roll-top that is seen better days
What your quote should include
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- How changes to the job are handled
- Who will actually do the work
Common questions in Millerston
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
Which areas do you work in?
Everywhere in the UK, Millerston included. Travel is included in the price.
Can you redo someone else’s repair?
Yes, we often do. It can add a little time, which we include in the quote.
How long will the bath be out of use?
One day for most baths, ready the following day. We’ll confirm timings when we quote.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
When we would advise against a repair
Some jobs aren’t right for a repair, including:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Holes rusted through the metal
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
