Cheshire West and Chester · England
Bath Re-enamelling in Milton Green
Bath re-enamelling for Milton Green, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- Stains that won’t shift
When we would advise against a repair
A repair isn’t right for every job, for example:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Bath re-enamelling at your home in Milton Green
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s a peeling or bubbling previous coating and chips and rust in more than one place, we can usually put it right.
You get a one-year guarantee, the same in Milton Green as everywhere else we work.
- Area
- Milton Green (CH3)
- Area hub
- Cheshire West and Chester
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Milton Green
More services for Milton Green
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Milton Green. What changes the price is:
- Whether old repairs or coatings need taking off
- What the surface is made of
- Unusual colours or finishes
- How many areas need work
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can normally get a fixed price without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- Where you are, by postcode
- What it’s made of, if you know
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Aftercare tips
To keep it looking its best for years:
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Have a window or extractor fan available
- Let us know if it has been repaired before
- Mention if the room is upstairs or in a flat
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Common problems we fix in Milton Green
Hard water speeds up the wear, and abrasive cleaners do the most damage.
People normally call us after spotting something like this:
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
What your quote should include
- How your room will be protected
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
- How long it needs to cure
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why Milton Green clients choose us
- Colour mixed on the day to match
- A year’s guarantee on all work
- Most jobs done in one visit
- A fixed quote before booking
Take a look at our full price list or bath cost comparison.
Landlord and trade work in Milton Green
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Milton Green: your questions answered
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
What areas do you cover?
Everywhere in the UK, Milton Green included. There’s no extra charge for travel.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
About Milton Green
Milton Green is about 6 miles south-east of Chester, in Cheshire West and Chester. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover 224 places across Cheshire West and Chester. We work right across the region, from Milton Green to Liverpool (about 20 miles away).
Our visits in CH3 work the same way as everywhere else we cover. Neighbouring places we cover include Aldersey Green (1 mile south), Hatton Heath (2 miles north), Bruera (2 miles north-west), Saighton (2 miles north-west) and Aldford (3 miles west). Larger places within reach include Chester (6 miles north-west), Ellesmere Port (11 miles north-west), Winsford (12 miles east), Northwich (15 miles north-east), Boughton (5 miles north-west) and Frodsham (12 miles north).
Around Milton Green
Our clients here include homes close to All Saints Church and the streets around them. Nearby you will also find Trevalyn Manor (6 miles west) and Bolesworth Castle (2.7 miles south-east). Not far away are Hockenhull Platts and Bickerton Hill.
About our accreditations · Every repair comes with a one-year guarantee.
