Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Milton, Pembrokeshire
Damaged bath in Milton? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
Bath re-enamelling at your home in Milton
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for chips and rust in more than one place and enamel that’s lost its shine and feels rough, across basins & shower trays, cast iron baths and Victorian roll-tops.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Area
- Milton (SA70)
- Region
- Pembrokeshire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Get any chip repaired quickly
- Fix dripping taps quickly
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What affects the price in Milton
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Whether old repairs or coatings need taking off
- How much damage there is
- The type of damage
- How many items we do on one visit
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Quotes from your photos
You can usually get a fixed price without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
How the visit works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. Allow a full day, and we’ll keep you posted as we go.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the day after.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
- Clear the area around the damage
Getting a price
Most customers in Milton get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Landlord and trade work in Milton
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Where we work around Milton
Milton is about 8 miles east of Milford Haven, in Pembrokeshire. Wherever you are in the SA70 postcode area, we carry out the work at your property. We cover all 223 towns and villages across Pembrokeshire.
We work across the SA70 postcode area. You’ll find streets such as Paskeston Road and Milton Meadows, all of which we cover. We also cover the places around Milton: Carew (1 mile north-east), Caeriw (1 mile north-east), Sageston (1 mile east), Mayeston (2 miles west) and Manorbier Newton (2 miles south). We also work in nearby towns such as Haverfordwest (9 miles north-west), Milford Haven (8 miles west), Pembroke (3 miles west), Pembroke Dock (4 miles west), The Marsh (9 miles north-west) and Dinbych-y-Pysgod (6 miles east).
Landmarks near Milton
In Milton, that means homes near St Mary's Church, Milton Brewery Inn and Sageston C.P. School. The closest station to Milton is Lamphey station, about 2.3 miles south-west. Further afield, we also cover the area around South Pembrokeshire Hospital (5 miles west) and Carew Castle (0.5 miles north-east). The countryside around Milton includes Mayeston Hill and Pembroke River upper.
Towns and villages near Milton
What else we do in Milton
When a repair isn’t the answer
Not everything can be repaired, and we would rather say so up front. Repairs will not solve:
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we will say what we think.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
FAQs for Milton
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send pictures.
Do you cover the entire of Pembrokeshire?
The entire UK, including all of Pembrokeshire. Send your postcode with your photos and we will confirm dates.
Common problems we fix in Milton
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
These are the problems we’re asked about most:
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- An outdated colour you’d like to change
Before booking anyone
- How your room will be protected
- What happens if the damage is worse than the photos show
- What prep work is covered
- How to look after the finish
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
About our accreditations · Every repair comes with a one-year guarantee.
