Cardiff · Wales

Bath Re-enamelling for Morristown homes

Bath re-enamelling in Morristown without the cost of replacing. Get a fixed price from your pictures, then book a visit.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • Staining under the taps and around the waste
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Morristown

What your bath is made of matters

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Bath re-enamelling in Morristown without replacing anything

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. We regularly repair basins & shower trays, pressed steel baths and acrylic baths, and common reasons people get in touch are enamel that’s lost its shine and feels rough and several chips and rust patches.

A one-year guarantee comes as standard.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Morristown (CF64)
Region
Cardiff
Cover
One year on every repair
Price
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026

What affects the price in Morristown

Prices start from £350. You’ll know the full cost before booking. We look at:

  • Any earlier repairs that need removing first
  • What the surface is made of
  • How many areas need work
  • What kind of damage it is

A repair normally costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Getting a price from photos

A couple of clear pictures is all it takes. Try to include:

  • Good light, ideally daylight, without flash glare
  • Any details about the material
  • Any earlier repairs or coatings
  • A clear, close picture of the problem area

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.

Common problems we fix in Morristown

Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Customers usually contact us about:

  • Thin, worn enamel in places
  • A roll-top that’s seen better days
  • Enamel that is lost its shine and feels rough
  • An outdated colour you’d like to change

What to look for in a quote

  • How long the guarantee is and what it covers
  • Whether the price is fixed and includes VAT
  • Whether they match the colour on site
  • What prep work is covered

Choosing a repair company

Questions from Morristown

Does the bath have to be removed?

No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

Is the work guaranteed?

Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Do you work in Morristown?

Yes. We work across the UK and come to Morristown and the rest of Cardiff. Send pictures and we will quote, or call 0345 017 0787.

Is there a call-out fee?

We don’t add a call-out fee. Your fixed quote includes everything.

Can I add another job to the visit?

Of course, and it generally saves money. Just add the extra items to your pictures and we will quote them together.

Repair or replace in Morristown?

Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.

Why Morristown clients choose us

  • A year’s guarantee on all work
  • Colour mixed on the day to match
  • We’ll tell you if it’s not worth repairing
  • A fixed quote before booking

Take a look at our pricing and guide to resurfacing and replacement costs.

How it works

Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. It generally takes most of the day, and you can get on with other things while we’re there.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Keep pets and children out of the room while we work
  • Point us to the nearest place to park

Get a quote

Send us photos of the damage and a wider shot of the entire item, and tell us you’re in Morristown, and we will reply with a fixed quote.

Send pictures for a quote

Related advice

Looking after it afterwards

Once the work has cured, treat it gently:

  • Don’t let dyes or oils sit on the finish
  • Clean with a soft cloth and mild detergent
  • Repair dripping taps early
  • Get any chip repaired quickly

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

DIY kit or professional repair?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Morristown and nearby

Morristown is about 4 miles north-east of Barry, in Cardiff. Across the CF64 area, a technician comes to you. Our repair technicians cover all 91 towns and villages across Cardiff.

Jobs in CF64 work the same way as everywhere else we cover. From Earl Road, Bute Lane and Sully Road or anywhere nearby, we can come to you. Close by, we cover Penarth (1 mile north-east), Lower Penarth (1 mile south-east), Cogan (1 mile north), Penarth Marina (1 mile north-east) and Llandough (1 mile north). Within a short drive, we also cover Cardiff (5 miles north), Ely (4 miles north-west), Castle (4 miles north), Adamsdown (4 miles north), Roath (4 miles north) and Splott (4 miles north-east).

Landmarks near Morristown

Locally, our jobs take us to homes close to Grangemoor Park, All Saints Church and Cefn Mably Inn and the streets around them. Nearby too are Stanwell School (within half a mile east) and Victoria Primary School (within half a mile north-east). The nearest railway station is Dingle Road station, roughly 0.5 miles north-east of the centre. Further afield, we also cover the area around Firing Line: Cardiff Castle Museum of the Welsh Soldier (3.3 miles north) and Old Cogan Hall Farm (0.6 miles south-west). The countryside around Morristown includes T. G. Tibbetts and Cosmeston Lakes (East).

Map of Morristown © OpenStreetMap contributors

Honest limits

It helps to know what we cannot do:

  • Steel that has corroded right through
  • A cast iron or steel bath that’s cracked right through
  • A poorly supported acrylic bath, until it’s firmed up

Send us photos and we will tell you honestly before you book.

Surfaces we repair

  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Cast iron baths
  • Pressed steel baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.