Norfolk · England

Bath re-enamelling & resurfacing in Langham, Norfolk

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Langham. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Langham

Common questions in Langham

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Langham.

Do you cover Langham?

Yes. We work across the UK and come to Langham. Send photos and we’ll quote, or call 0345 017 0787.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is there a smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

What if the damage is worse than the pictures show?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Can a failed resurfacing be redone?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Can you quote from pictures?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

How we handle bath re-enamelling in Langham

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Common call-outs are for wear marks under the taps and a bath in a colour that no longer suits, on basins & shower trays, cast iron baths and Victorian roll-tops.

All of our repairs are guaranteed for twelve months in Langham and everywhere else. We return to put right any problem with the work.

Location
Langham (NR25)
Area hub
Norfolk
Warranty
A year, on every repair
Quote
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

What we do, step by step

There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a full day, including clearing up.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Make sure the area is dry
  • Have somewhere for us to park nearby if possible
  • Open a window if you can

Get a quote

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

Get a fixed quote

Advice

Different materials, different repairs

Cast iron

Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Landlord and trade work in Langham

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

We regularly work with letting and managing agents. Just send photos, the address and how to get access.

What bath re-enamelling costs

Prices start from £350. Every quote is fixed and free. What we take into account:

  • Where the damage is and how we get to it
  • The type of damage
  • Doing more than one item at once
  • The material and finish

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Send photos for a quote

Good pictures mean an accurate price. Here’s what we find most useful:

  • A picture taken from further back
  • A coin or ruler next to the damage for scale
  • Any earlier repairs or coatings
  • Where you are, by postcode

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Do you need bath re-enamelling in Langham?

Often the bath has just had decades of use. Underneath, a cast iron or steel bath is typically as strong as ever.

Look out for any of the following:

  • A bath that stays dull however much you clean it
  • Stains that will not shift
  • A bath in a colour that no longer suits
  • Wear marks under the taps

What to look for in a quote

  • Whether the price covers travel
  • What preparation is included
  • Whether the price is fixed and includes VAT
  • Whether they match the colour on site

How to compare quotes

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Rinse off hair dye, oils and bath bombs immediately
  • Wipe the bath dry after use in hard water areas
  • Repair dripping taps early
  • Keep toiletries on a shelf rather than in the bath

Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

Honest limits

It helps to know what we cannot do:

  • An acrylic bath that flexes badly underfoot
  • A cast iron or steel bath that’s cracked right through
  • Damage hidden under a previous coating, until it’s stripped back

Send us pictures and we will tell you honestly before you book.

What we work on

  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Where we work around Langham

Langham is about 18 miles north of Dereham, in Norfolk. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Langham is one of 797 places in Norfolk we cover.

Here we cover the NR25 postcode area. Streets in the area include North Street, Holt Road and Marryats Loke. If you’re just outside Langham, we cover Field Dalling (1 mile south), Saxlingham (2 miles south-east), Morston (2 miles north), Binham (2 miles south-west) and Blakeney (2 miles north-east). Within a short drive, we also cover Sheringham (9 miles east), Cromer (13 miles east), Fakenham (9 miles south-west), Aylsham (15 miles south-east), Holt (5 miles east) and Wells-next-the-Sea (6 miles west).

Landmarks near Langham

Our customers here include homes close to Langham Village School, The Bluebell pub and Church of St Mary and St Andrew. Other landmarks nearby include The Shell Museum (2.2 miles east) and Glandford with Bayfield (2.5 miles east). The countryside around Langham includes Blakeney Point.

Map of Langham © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.