North Yorkshire · England
Bath Re-enamelling in Lebberston
Bath re-enamelling across Lebberston and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Stains that won’t shift
Landlord and trade work in Lebberston
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Bath re-enamelling in Lebberston without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the next day. We are often asked to fix an outdated colour you’d like to change and a roll-top that’s seen better days, on acrylic baths, Victorian roll-tops and cast iron baths.
Whatever the size of the job, it’s backed by a one-year guarantee in Lebberston and across North Yorkshire.
- Location
- Lebberston (YO11)
- Region
- North Yorkshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Places near Lebberston
More services for Lebberston
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Covering Lebberston
Lebberston is about 4 miles south-east of Scarborough, in North Yorkshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover 626 places across North Yorkshire. You can also see our page for Leeds, about 57 miles away.
All of YO11 is within our area. Jobs here include addresses on Grange Close and Green Lane and the roads around them. We also cover the places around Lebberston: Gristhorpe (1 mile south-east), Killerby (1 mile west), Cayton (2 miles west), Osgodby (2 miles north-west) and Muston (2 miles south-east). We also work in nearby towns such as Scarborough (4 miles north-west), Falsgrave (4 miles north-west), Northstead (5 miles north-west), Newby (6 miles north-west), Hunmanby (3 miles south) and Scalby (7 miles north-west).
Landmarks near Lebberston
Our customers here include homes close to St Thomas, George Pindar School and The Ox Inn and the streets around them. For rail, the closest station is Filey station, roughly 2.5 miles south-east. Nearby you will also find Scarborough Castle (4.5 miles north) and Scarborough Hospital (5.2 miles north-west). Green spaces nearby include Oliver's Mount and Scarborough Mere.
What bath re-enamelling costs
Resurfacing from £350. We price every job individually. What matters most is:
- How hard the colour is to match
- Access to the area
- The type of damage
- How much damage there is
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
Send pictures for a quote
You can take the photos on your phone. Just make sure we can see:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- The material, if you know it
If you’re in Lebberston and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
What a repair cannot fix
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
The process
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
How to prepare
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Read more
Repair or replace: which is better?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- Repair technicians who travel to you, UK-wide
Read our pricing or bath cost comparison.
Lebberston questions
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you work in Lebberston?
Yes. We work across the UK and come to Lebberston. Send us photos for a fixed quote, or call 0345 017 0787.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Is there any odour?
Expect a mild smell while we are working.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- A dripping tap should be fixed promptly
- Have chips seen to early
- Wash away dyes and oils after use
- Avoid suction-cup mats
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
