North Yorkshire · England
Bath Re-enamelling in Gristhorpe
Problem with your bath in Gristhorpe? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- A peeling or bubbling previous coating
When to call us in Gristhorpe
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Keep an eye out for these signs:
- A coating lifting around the plughole
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
- A roll-top that is seen better days
Questions to ask before you book
- What prep work is covered
- Aftercare advice
- What happens if the damage is worse than the photos show
- Whether they match the colour on site
Bath re-enamelling in Gristhorpe without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We work on basins & shower trays, pressed steel baths and Victorian roll-tops, and people most frequently call us about an original cast iron bath that needs restoring and chips and rust in more than one place.
A one-year guarantee comes as standard.
- Location
- Gristhorpe (YO14)
- County
- North Yorkshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Also near Gristhorpe
What else we do in Gristhorpe
Gristhorpe and the surrounding area
Gristhorpe is about 5 miles south-east of Scarborough, in North Yorkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Gristhorpe is one of 626 towns and villages in North Yorkshire we cover. We work right across the region, from Gristhorpe to Leeds (about 57 miles away).
Here we cover the YO14 postcode area. Whether you live on Main Street, Lodge Gardens and Sixton Place or anywhere nearby, we can come to you. We also cover the places around Gristhorpe: Lebberston (1 mile north-west), Killerby (1 mile west), Muston (2 miles south), Cayton (2 miles north-west) and Osgodby (3 miles north-west). Larger places within reach include Scarborough (5 miles north-west), Falsgrave (5 miles north-west), Northstead (6 miles north-west), Newby (7 miles north-west), Hunmanby (3 miles south) and Scalby (7 miles north-west).
What’s near Gristhorpe
We visit homes around Ebor Academy Filey, The Bull Inn and St Thomas and the streets around them. The nearest railway station is Filey station, about 1.7 miles south-east of the centre. A little further out are Scarborough Hospital (5.9 miles north-west) and Scarborough Fair Collection (1 mile north). For a walk, there’s Oliver's Mount and Scarborough Mere.
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Gristhorpe. The price reflects:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- Access to the area
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- A coin or ruler next to the damage for scale
- A picture taken from further back
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
When a repair is not the answer
In fairness, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
FAQs for Gristhorpe
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can you repair something that is been repaired before?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
What areas do you cover?
Across the UK, so Gristhorpe is covered. Our prices are the same everywhere.
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the next day.
Preparing for the visit
- Ensure the room can be ventilated
- Keep pets and children out of the room while we work
- Move bottles, mats and clutter away from the area
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Landlords, agents and businesses in Gristhorpe
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Looking after it afterwards
Once the work has cured, treat it gently:
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
- Wipe the bath dry after use in hard water areas
- Don’t leave a chip unrepaired
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
