Slough · England
Bath Re-enamelling in Myrke
We travel to Myrke for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
About our bath re-enamelling in Myrke
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We’re often asked to fix wear marks under the taps and a coating lifting around the plughole, in cast iron baths, Victorian roll-tops and pressed steel baths.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Myrke (SL3)
- Region
- Slough
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlord and trade work in Myrke
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We are used to working with agents and managing companies. Send the address, photos and access details.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Nearby places to Myrke
What else we do in Myrke
Honest limits
Some jobs are not right for a repair, including:
- A bath split right through the body
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
Send us photos and we’ll tell you honestly before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Common questions in Myrke
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair something that is been repaired before?
Yes, we often do. It can add a little time, which we include in the quote.
Do you cover the whole of Slough?
All of Slough, and the rest of the UK. There’s no extra charge for travel.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes the best part of a day. The room is left tidy and ready to use once it has cured.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Make sure the room can be ventilated
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
Read more
Where we work around Myrke
Myrke is about 1 mile south-east of Slough, in Slough. We travel to homes and businesses in Myrke and the surrounding area, so there’s no workshop to go to. We cover 31 places across Slough. We work right across the region, from Myrke to London (about 21 miles away).
Jobs in SL3 are booked in the same way as anywhere else. We also cover the places around Myrke: Ditton (1 mile south-east), Datchet (1 mile south-east), Sunnymeads (3 miles south-east), Brands Hill (3 miles south-east) and Old Windsor (3 miles south). Further out, we also cover Britwell (3 miles north-west), Burnham (4 miles north-west), Stoke Poges (3 miles north), Huntercombe (3 miles north-west), Farnham Common (4 miles north) and Farnham Royal (3 miles north).
Landmarks near Myrke
In Myrke, that means homes near Long Close School, The Red Cow Public House and Upton Court Grammar School. You will also find Church of St Laurence (within half a mile north-east), Herschel Park (less than half a mile north-west) and St Mary's Church of England Primary School (0.5 miles north-east). The nearest railway station is Slough station, roughly 0.9 miles north of the centre. Nearby you’ll also find Windsor Castle (1.2 miles south-west) and Upton Hospital (0.5 miles north). Open spaces near Myrke include Stoke Common and Taplow Lake.
- Parks and local facilities nearby include Municipal Borough of Slough (0.8 miles north)
Signs you need bath re-enamelling in Myrke
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
Signs it’s time to call us include:
- A bath that stays dull however much you clean it
- Stains that will not shift
- Thin, worn enamel in places
- A coloured bath you want in white
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Whether the price covers travel
- How the room is protected while they work
- How long it needs to cure
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The type of damage
- How many items we do on one visit
- The size and number of damaged areas
- Previous DIY repairs that have to come out
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Any details about the material
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Rinse off hair dye, oils and bath bombs right away
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
