Bath and North East Somerset · England

Bath Re-enamelling in Nailwell

Bath re-enamelling in Nailwell without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Nailwell

How the visit works

We begin by going over the job with you. After that, protection goes down around the work area and the work begins. Allow most of the day.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the next day.

Before we arrive

  • Keep children and pets away from the room on the day
  • Open a window if you can
  • Make sure the area is dry

Ask for a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Send pictures for a quote

Advice

How we handle bath re-enamelling in Nailwell

We do not move the bath, so the taps, tiles and plumbing are not touched. It normally takes one visit, and can be used again the next day. Whether it’s a roll-top that’s seen better days and several chips and rust patches, we can help, whatever the material.

Whatever the size of the job, you get the same one-year guarantee.

Where
Nailwell (BA2)
Area hub
Bath and North East Somerset
Warranty
One year on every repair
Price
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Landlords, agents and businesses in Nailwell

Housing associations and facilities teams use us for planned and reactive repairs in Bath and North East Somerset and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Questions from Nailwell

How long is the bath unusable?

Generally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.

How much does bath re-enamelling cost in Nailwell?

Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.

Can a failed resurfacing be redone?

Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.

Are there extra charges for Nailwell?

There’s no separate call-out charge. Your fixed price includes everything.

What do you need from me?

A close-up, a wider photo and your postcode. Then we will agree a date.

Can you repair something that is been repaired before?

Generally, yes. Let us know what was used before and we’ll plan for it.

Does re-enamelling smell?

Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.

Can you quote from photos?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Where we work around Nailwell

Nailwell is about 3 miles south-west of Bath, in Bath and North East Somerset. Jobs in Nailwell are booked in like any other job: a fixed price from your photos, then a visit to do the work. We cover all 136 towns and villages in Bath and North East Somerset, from the larger towns to small villages.

Here we cover the BA2 postcode area. We also cover the places around Nailwell: Longhouse (1 mile south), Priston (1 mile west), Dunkerton (1 mile south), Withyditch (1 mile south) and Englishcombe (2 miles north-east). Larger places within reach include Bath (3 miles north-east), Keynsham (5 miles north-west), Bathwick (4 miles north-east), Walcot (4 miles north-east), Westmoreland (3 miles north-east) and Kingsmead (3 miles north-east).

Around Nailwell

Typical jobs here are in homes near Bath Community Academy, Ring O'Bells pub and Church of St Luke and St Andrew, among other places. The closest station to Nailwell is Oldfield Park station, roughly 2.9 miles north-east. Further afield, we also cover the area around Midford Castle (3.3 miles east) and Royal United Hospital (3.4 miles north-east). Green spaces nearby include Stephen's Vale Nature Reserve and Hunstrete Lake.

Map of Nailwell © OpenStreetMap contributors

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Wipe the bath dry after use in hard water areas
  • Do not let dyes or oils sit on the finish
  • Avoid suction-cup mats
  • Repair dripping taps early

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further.

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

Signs you need bath re-enamelling in Nailwell

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

Typical reasons for a call-out include:

  • A coloured bath you want in white
  • Chips and rust in more than one place
  • Brown or grey marks that don’t clean off
  • An original cast iron bath that needs restoring

What to look for in a quote

  • How changes to the job are handled
  • Whether cleaning and preparation are in the price
  • The length of the guarantee and what it covers
  • Whether the price covers travel

How to compare quotes

What a repair can’t fix

A few problems are outside what a surface repair can do:

  • Steel that has corroded right through
  • A metal bath with a through crack
  • Plumbing leaks, which need a plumber

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we repair

  • Victorian roll-tops
  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays

Prices and what affects them

Prices start from £350. We charge the same across the UK, including Nailwell. What changes the price is:

  • Unusual colours or finishes
  • How many items we do on one visit
  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear

We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed price

Almost every job we do is priced from pictures. This is what we need:

  • Where you are, by postcode
  • Any details about the material
  • Any earlier repairs or coatings
  • A photo taken from further back

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.