Bath and North East Somerset · England
Bath Re-enamelling for Englishcombe homes
Local bath re-enamelling for Englishcombe: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- A coloured bath you want in white
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Bath re-enamelling in Englishcombe, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on Victorian roll-tops, basins & shower trays and acrylic baths, and people most often call us about a coating lifting around the plughole and worn patches where water runs and sits.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Englishcombe (BA2)
- Region
- Bath and North East Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Englishcombe questions
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Any earlier repairs that need removing first
- How many items we do on one visit
- What the surface is made of
- How many areas need work
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Getting a price from photos
When you take your photos, a few simple things make all the difference:
- A wider photo showing the whole bath
- Daylight if possible, and no flash reflection
- Details of any past repairs
- The material, if you know it
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
What we’re called out for in Englishcombe
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, usually first under the taps and around the waste.
Look out for these signs:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- Several chips and rust patches
What your quote should include
- When it can be used again
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- What aftercare is recommended
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- We will tell you if it’s not worth repairing
- No need to remove anything
- One visit for most repairs
- Colour-matched on site
See our full price list and guide to resurfacing and replacement costs.
About Englishcombe
Englishcombe is about 2 miles south-west of Bath, in Bath and North East Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 136 places in Bath and North East Somerset. Our jobs stretch from Englishcombe to Birmingham (79 miles away).
Postcode districts we cover here: BA2. Nearby, we also work in Whiteway (1 mile north), Newton St Loe (1 mile north-west), Nailwell (2 miles south-west), Longhouse (2 miles south) and Priston (2 miles south-west). Within a short drive, we also cover Keynsham (5 miles north-west), Bathwick (3 miles north-east), Walcot (3 miles north-east), Lansdown (3 miles north-east), Larkhall (3 miles north-east) and Paulton (6 miles south-west).
Near you in Englishcombe
Our clients here include homes close to Trowbridge House, Church of St Peter and Roundhill Primary School and the streets around them. The nearest railway station is Oldfield Park station, about 1.4 miles north-east. Further afield, we also cover the area around SouthGate (2.2 miles north-east) and Royal United Hospital (1.9 miles north). Not far away are Hunstrete Lake.
Honest limits
We will always be straight with you, so here’s what a repair can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
Send us pictures and we will tell you honestly before you book.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Other services in Englishcombe
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Open a window if you can
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
Get a quote
Most clients in Englishcombe get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Keep suction mats out of the bath
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs straight away
- Wipe the bath dry after use in hard water areas
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
About our accreditations · Every repair comes with a one-year guarantee.
