Liverpool · England
Bath re-enamelling & resurfacing in Netherley, Liverpool
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Netherley. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Wear marks under the taps
Do you need bath re-enamelling in Netherley?
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Look out for any of the following:
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
- Stains that won’t shift
- An old resurfacing that’s failing
What to look for in a quote
- A fixed price, and whether VAT is included
- Whether the colour is mixed to match
- When it can be used again
- What happens if the damage is worse than the photos show
Bath re-enamelling in Netherley, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you’re dealing with lots of chips and rust spots and brown or grey marks that don’t clean off, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Netherley (L27, L25, L35)
- Region
- Liverpool
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Netherley
What else we do in Netherley
What we do, step by step
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow a full day. Before leaving, we tell you how long to leave it and how to care for it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Have a window or extractor fan available
- Keep a parking space free if you can
- Let us know about parking or access
How to get a price
Upload pictures of the damage and one of the whole item, with your L27 postcode, and we’ll reply with a fixed quote.
Advice
Our work in Netherley
Netherley is about 1 mile south of Huyton, in Liverpool. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 52 towns and villages in Liverpool.
Postcode districts we cover here: L27, L25 and L35. We regularly work on streets such as Wood Lane, Holt Lane and Runton Road and the roads around them. Neighbouring places we cover include Belle Vale (1 mile north-west), Gateacre (1 mile south-west), Woolton (1 mile south-west), Tarbock Green (1 mile east) and Childwall (2 miles west). Larger places within reach include Liverpool (4 miles west), Crosby (10 miles north-west), Everton (6 miles west), Orrell (8 miles north-west), Brighton-le-Sands (10 miles north-west) and Wavertree (4 miles west).
Landmarks near Netherley
Typical jobs here are in homes near Bridge Inn, Reynolds Park and St Gregory's Catholic Primary School. Other local landmarks include Christ Church (within half a mile south) and Willowfield School (less than half a mile west). For rail, the closest station is Huyton station, about 1.4 miles north of the centre. Nearby you will also find Broadgreen Hospital (2.8 miles north-west) and New Mersey Shopping Park (3.1 miles south-west). Open spaces near Netherley include Princes Park lake and Speke and Garston Coastal Reserve.
- Parks and local facilities nearby include Little Woolton (0.8 miles west)
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Netherley customers choose us
- Most jobs done in one visit
- Everything repaired in place
- Honest advice, even when it means no job
- Colour mixed on the day to match
Read our prices page or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from pictures. This is what makes a difference:
- The colour and finish to match
- Whether we combine several jobs
- What kind of damage it is
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Getting a price from pictures
You can take the photos on your phone. Just make sure we can see:
- Something in shot to show the size
- Details of any past repairs
- What it’s made of, if you know
- A photo taken from further back
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Keeping it looking good
Nothing complicated is needed:
- Do not leave a chip unrepaired
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Netherley: your questions answered
How do I book?
Send pictures through the quote form or call 0345 017 0787.
Is there any odour?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Do you cover the whole of Liverpool?
We work UK-wide, and that includes Netherley. Prices do not change with location.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
How much does bath re-enamelling cost in Netherley?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item with your L27 postcode.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you come to Netherley?
Yes, we do. Repair technicians travel to Netherley from across the region, with no extra charge for travel.
What happens next?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
- Problems we can’t see until an old finish comes off
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Netherley
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
