Liverpool · England
Bath re-enamelling & resurfacing in Belle Vale, Liverpool
Bath re-enamelling for Belle Vale, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
Bath re-enamelling in Belle Vale without replacing anything
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We are often asked to fix a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring, on cast iron baths, acrylic baths and Victorian roll-tops.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Belle Vale (L25, L27, L16)
- Region
- Liverpool
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why Belle Vale customers choose us
- A fixed quote before you book
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
- A year’s guarantee on all work
Take a look at our prices page and resurfacing vs replacement cost guide.
Places near Belle Vale
What else we do in Belle Vale
Keeping it looking good
How the surface is treated afterwards matters. Here’s what we suggest:
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Leave the bath for the full curing time before using it
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Work for landlords and builders
For anyone letting property in or around Belle Vale, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Landlords, letting agents and housing providers in Belle Vale use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Belle Vale: your questions answered
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
What areas do you cover?
We cover the whole UK, including Belle Vale and the rest of Liverpool. Just include your postcode and we’ll confirm dates.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can you do the outside of a roll-top?
Yes. Inside and out.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a call-out fee?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Belle Vale and the surrounding area
Belle Vale is about 1 mile south-west of Huyton with Roby, in Liverpool. Anywhere in L25, we carry out the work at your property. Belle Vale is one of 52 places in Liverpool we cover.
All of L25, L27 and L16 is covered, from the main roads to the quietest streets. That includes homes on Escor Road, Sarum Road and Wambo Lane. We also travel to Gateacre (1 mile south), Childwall (1 mile west), Netherley (1 mile south-east), Woolton (1 mile south) and Allerton (2 miles south-west). We also work in nearby towns such as Liverpool (3 miles west), Crosby (9 miles north-west), Everton (5 miles west), Orrell (7 miles north-west), Brighton-le-Sands (9 miles north-west) and Wavertree (3 miles west).
Around Belle Vale
Our customers here include homes close to The Cats Whiskers pub, Gateacre School and Bowring Park and the streets around them. You will also find Our Lady of the Assumption Catholic Primary School (within half a mile south) and St. Mark's Church (less than half a mile west). Belle Vale’s nearest station is Roby station, about 1.1 miles north. A little further out are Liverpool Shopping Park (2.8 miles west) and Broadgreen Hospital (1.9 miles north-west). Not far away are Speke and Garston Coastal Reserve and Princes Park lake.
- Local facilities include Little Woolton (0.6 miles south)
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Belle Vale
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
How the visit works
The work is clean and fairly quiet. We protect the area first, then the job itself takes a full day. Before we leave, we explain how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Advice
Prices and what affects them
Resurfacing from £350. We do not charge extra for travel to Belle Vale. The price comes down to:
- Access to the area
- How hard the colour is to match
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- The material, if you know it
- A coin beside the damage so we can judge size
- One picture of the whole bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
