Coventry · England
Bath Re-enamelling for New Arley homes
Bath re-enamelling in New Arley without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A roll-top that is seen better days
- Wear marks under the taps
Bath re-enamelling at your home in New Arley
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We are frequently asked to fix a coating lifting around the plughole and thin, worn enamel in places, on acrylic baths, basins & shower trays and cast iron baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- New Arley (CV7)
- Area hub
- Coventry
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around New Arley
New Arley is about 4 miles north-west of Bedworth, in Coventry. Our technicians come to customers in New Arley and the surrounding area, so nothing has to leave your home. We work in all 88 towns and villages in Coventry. Our nearest city page is Birmingham, about 14 miles away.
Every address in CV7 is within our area. From Hollick Crescent, Lichfield Close and Earnlege Way or a nearby road, a technician can come to you. We also cover the places around New Arley: Old Arley (1 mile north-west), Devitts Green (1 mile north-west), Astley (1 mile east), Ansley (1 mile north-east) and Galley Common (2 miles north-east). We also work in nearby towns such as Coventry (7 miles south-east), Hillfields (7 miles south-east), Bishopsgate Green (7 miles south-east), Radford (7 miles south), Ernesford Grange (9 miles south-east) and Foleshill (7 miles south-east).
Landmarks near New Arley
Around New Arley, we work in homes near Arley Primary School and St Michael and the streets around them. New Arley’s nearest station is Bermuda Park station, roughly 4.2 miles east of the centre. A little further out are Hartshill Castle (3.6 miles north-east) and George Eliot Hospital (4.1 miles east). Green spaces nearby include Ladywalk Reserve.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How it works
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. Allow most of the day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
Get a quote
Email us a photo of the damage and a wider shot of the entire item, and tell us you’re in New Arley, and we’ll come back with a fixed quote.
Read more
What a repair cannot fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- The type of damage
- How easy the damage is to reach
- How many areas need work
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your photos
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- Your postcode, so we can check dates
- Natural light rather than flash
- A photo taken from further back
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Do not use the bath until it has fully cured
- Don’t leave a chip unrepaired
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Nearby places to New Arley
Also in New Arley
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
What you get with us
- Honest advice, even when it means no job
- A fixed quote before booking
- A year’s guarantee on all work
- Rooms protected and left tidy
Read our full price list or guide to resurfacing and replacement costs.
What we’re called out for in New Arley
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
Contact us if you’ve noticed:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- Lots of chips and rust spots
Comparing quotes
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
- Who turns up on the day
Landlord and trade work in New Arley
We work for landlords, letting agents and housing providers in New Arley as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
If you manage property in New Arley, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Your questions about bath re-enamelling in New Arley
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
About our accreditations · Every repair comes with a one-year guarantee.
