East Riding of Yorkshire · England
Bath Re-enamelling for New Ellerby homes
Bath re-enamelling in New Ellerby without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- Wear marks under the taps
- An outdated colour you’d like to change
About our bath re-enamelling in New Ellerby
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Our technicians work on cast iron baths, acrylic baths and Victorian roll-tops, and common reasons people get in touch are several chips and rust patches and a roll-top that’s seen better days.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- New Ellerby (HU11)
- Area hub
- East Riding of Yorkshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in New Ellerby?
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
People usually call us after spotting something like this:
- A peeling or bubbling previous coating
- A coloured bath you want in white
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
Comparing quotes
- What happens if they find more damage
- Whether the price covers travel
- How to look after the finish
- How long it needs to cure
Keeping it looking good
So the finish stays in good condition for years:
- Store bottles off the bath
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What a repair can’t fix
We will always be straight with you, so here’s what a repair won’t do:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- How easy the damage is to reach
- The type of damage
- How much damage there is
- Whether we combine several jobs
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- One picture of the whole bath
- A coin beside the damage so we can judge size
- Any details about the material
- Any earlier repairs or coatings
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
About New Ellerby
New Ellerby is about 7 miles north-east of Kingston upon Hull, in East Riding of Yorkshire. Across the HU11 area, we come to you. Our repair technicians cover all 299 towns and villages in East Riding of Yorkshire. Our nearest city page is Leeds, about 54 miles away.
Jobs in HU11 are booked in the same way as anywhere else. Local streets include Langthorpe Road, Lambwath Lane and Marton Road, all of which we cover. Other places close to New Ellerby include Old Ellerby (1 mile south), Skirlaugh (2 miles west), Rise (2 miles north), Coniston (3 miles south) and Arnold (3 miles north-west). We also work in nearby towns such as Beverley (8 miles west), Driffield (14 miles north-west), Hessle (12 miles south-west), Cottingham (9 miles south-west), Hornsea (5 miles north-east) and Hedon (7 miles south).
Local landmarks in New Ellerby
Our clients here include homes close to St James and The Railway Inn and the streets around them. Further afield, we also cover the area around Princess Royal Hospital (4.8 miles south-west) and Aldbrough Castle (4.5 miles east). Not far away are Hornsea Mere.
How it works
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow most of the day from start to finish. Before we go, we’ll explain when it can be used and how to look after it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Related advice
Nearby places to New Ellerby
Other services in New Ellerby
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Common questions in New Ellerby
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
How do I book?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Does re-enamelling smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How much does bath re-enamelling cost in New Ellerby?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your HU11 postcode.
Work for landlords and builders
If you manage property in New Ellerby, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams in East Riding of Yorkshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Repair or replace in New Ellerby?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why New Ellerby customers choose us
- Same prices wherever you are
- Dust sheets down, tidy finish
- A fixed quote before you book
- Work done at your home or business
Read our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
