Aberdeenshire · Scotland
Bath Re-enamelling in New Pitsligo
Fixed-price bath re-enamelling in New Pitsligo and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Stains that will not shift
- Thin, worn enamel in places
Landlord and trade work in New Pitsligo
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
For anyone letting property in or around New Pitsligo, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Bath re-enamelling at your home in New Pitsligo
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with an old resurfacing that’s failing and stains that won’t shift, we can help, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- New Pitsligo (AB43)
- Region
- Aberdeenshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
New Pitsligo: your questions answered
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
How long will the bath be out of use?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Towns and villages near New Pitsligo
What else we do in New Pitsligo
Repairing versus replacing in New Pitsligo
If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- No need to remove anything
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- Technicians who travel to you, UK-wide
See our prices page and bath cost comparison.
About New Pitsligo
New Pitsligo is about 9 miles south-west of Fraserburgh, in Aberdeenshire. Whether you’re in the middle of New Pitsligo or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 161 towns and villages across Aberdeenshire.
We work across AB43. From High Street, Market Place and Low Street or anywhere nearby, a technician can come to you. We also cover the places around New Pitsligo: New Byth (4 miles west), Strichen (4 miles east), New Aberdour (5 miles north), Garmond (5 miles south-west) and New Deer (5 miles south). We also work in nearby towns such as Fraserburgh (9 miles north-east), Turriff (10 miles west), Banff (13 miles west), Macduff (12 miles north-west), Mintlaw (9 miles south-east) and Broadsea (10 miles north-east).
What’s near New Pitsligo
Our customers here include homes close to St John's Church. Well-known places in the area include Maud Hospital (5.8 miles south-east) and Fedderate Castle (3.9 miles south). Green spaces nearby include Glasslaw Loch and Mormond Hill.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. You can expect it to take most of the day, and we will keep you posted as we go.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep pets and children out of the room while we work
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
How to get a price
To get a price, send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Don’t let dyes or oils sit on the finish
- Never use suction bath mats
- Do not use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What we cannot put right
We will not take on work that will not last, so here’s what a repair cannot put right:
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
Send us photos and we will tell you honestly.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
What we are called out for in New Pitsligo
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
The things clients typically mention when they call include:
- Wear marks under the taps
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
Comparing quotes
- Whether cleaning and preparation are in the price
- A fixed price, and whether VAT is included
- Whether they match the colour on site
- If travel is included in the price
About our accreditations · Every repair comes with a one-year guarantee.
