Telford and Wrekin · England
Bath re-enamelling & resurfacing in Chetwynd, Telford and Wrekin
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Chetwynd. Free, fixed quotes from your photos.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
Bath re-enamelling in Chetwynd, done in place
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. If you’re dealing with thin, worn enamel in places and an old resurfacing that’s failing, we can help, on cast iron baths, pressed steel baths and acrylic baths alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Chetwynd and across Telford and Wrekin.
- Location
- Chetwynd (TF10)
- County
- Telford and Wrekin
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Chetwynd?
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. We don’t add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Chetwynd clients choose us
- Rooms protected and left tidy
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
- Same prices wherever you are
Read our full price list or bath cost comparison.
What bath re-enamelling costs
Prices start from £350. We price every job individually. The main factors are:
- What kind of damage it is
- Access to the area
- How many areas need work
- The colour and finish to match
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
You can take the photos on your phone. Make sure they show:
- A photo taken from further back
- The material, if you know it
- A clear, close picture of the problem area
- Your postcode, so we can check dates
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Also near Chetwynd
What else we do in Chetwynd
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to a full day.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Let us know about parking or access
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Don’t use the bath until it has fully cured
- Rinse off hair dye, oils and bath bombs right away
- Stick to gentle, non-abrasive cleaners
- Do not leave a chip unrepaired
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
What we can’t put right
A repair isn’t right for every job, including:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
When to call us in Chetwynd
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
The most common problems we are called about are:
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
- An old resurfacing that is failing
- Chips and rust in more than one place
Comparing quotes
- Who turns up on the day
- What prep work is covered
- The length of the guarantee and what it covers
- When it can be used again
Questions from Chetwynd
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How much does bath re-enamelling cost in Chetwynd?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Landlords, agents and businesses in Chetwynd
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Where we work around Chetwynd
Chetwynd is about 2 miles north-west of Newport, in Telford and Wrekin. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Chetwynd is one of 79 towns and villages in Telford and Wrekin we cover. Our jobs stretch from Chetwynd to Birmingham (31 miles away).
Here we cover the TF10 postcode area. Local streets include Chetwynd Park and Chester Road, and we cover them all. Other places close to Chetwynd include Forton (1 mile east), Newport (2 miles south-east), Sutton (2 miles east), Church Aston (2 miles south) and Chetwynd Aston (3 miles south). Further out, we also cover Telford (8 miles south-west), Wellington (8 miles south-west), Dawley (9 miles south), Oakengates (7 miles south), The Rock (8 miles south-west) and Newdale (8 miles south-west).
Around Chetwynd
Typical jobs here are in homes near Haberdashers' Adams, Church of St Michael and All Angels and St Peter and St Paul Catholic Primary School and the streets around them. Other landmarks nearby include Aqualate Castle (2.4 miles south-east). Open spaces near Chetwynd include Aqualate Mere and Loynton Moss.
About our accreditations · Every repair comes with a one-year guarantee.
