Leicestershire · England

Bath Re-enamelling in Newton Burgoland

Full bath re-enamelling and resurfacing for homes and businesses in Newton Burgoland and across Leicestershire. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • Several chips and rust patches
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Newton Burgoland?

What your bath is made of matters

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.

How we handle bath re-enamelling in Newton Burgoland

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. Whether it’s worn patches where water runs and sits and a roll-top that’s seen better days, we can usually put it right, on pressed steel baths, acrylic baths and basins & shower trays alike.

You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.

Area
Newton Burgoland (LE67)
County
Leicestershire
Warranty
A year, on every repair
Quotes
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Common problems we fix in Newton Burgoland

Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.

The things clients generally mention when they call are:

  • Brown or grey marks that don’t clean off
  • A roll-top that is seen better days
  • A bath in a colour that no longer suits
  • Enamel that’s lost its shine and feels rough

Before booking anyone

  • Aftercare advice
  • Whether they match the colour on site
  • Whether there are any call-out or travel charges
  • How changes to the job are handled

How to compare quotes

Your questions about bath re-enamelling in Newton Burgoland

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

How soon can you come?

Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.

Does re-enamelling smell?

There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.

What do you need from me?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Will there be a smell?

There may be a mild smell during the work.

Is the work guaranteed?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

Repair or replace in Newton Burgoland?

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before you book, with no extras added later.

Why book with us

  • Rooms protected and left tidy
  • Straight answers about what a repair can do
  • Free fixed quotes from pictures
  • Every repair guaranteed for a year

See our prices page and guide to resurfacing and replacement costs.

Keeping it looking good

How the surface is treated afterwards matters. Here’s what we suggest:

  • Get any chip repaired quickly
  • Never use suction bath mats
  • Repair dripping taps early
  • A quick wipe after use keeps limescale away

The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

Landlords, agents and businesses in Newton Burgoland

For anyone letting property in or around Newton Burgoland, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Covering Newton Burgoland

Newton Burgoland is about 5 miles south of Ashby-de-la-Zouch, in Leicestershire. Clients in Newton Burgoland get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We work in all 287 towns and villages in Leicestershire. You can also see our page for Birmingham, about 23 miles away.

We work across LE67. That includes homes on Main Street, Nethercote and Francis Lane. Other places close to Newton Burgoland include Swepstone (1 mile north), Snarestone (1 mile west), Shackerstone (2 miles south), Heather (2 miles north-east) and Odstone (2 miles south-east). Within a short drive, we also cover Loughborough (12 miles north-east), Hinckley (10 miles south), Coalville (5 miles north-east), Ashby-de-la-Zouch (5 miles north), Shepshed (9 miles north-east) and Shelthorpe (12 miles north-east).

Landmarks near Newton Burgoland

Typical jobs here are in homes near Newton Burgoland Primary School, Congregational Church With Front Railings and Ibstock Community College, among other places. Well-known places in the area include Ashby de la Zouch Castle (4.6 miles north) and Shackerstone railway station (1.8 miles south).

Map of Newton Burgoland © OpenStreetMap contributors

What we do, step by step

Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and we leave the room as we found it.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Let us know about parking or access
  • Let the surface dry out before the visit
  • Clear toiletries, mats and anything else from around the area

Ask for a price

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Send photos for a quote

Advice

When we would advise against a repair

To be straight with you, there are a few things a repair won’t fix:

  • Acrylic that moves when you stand in it
  • A bath that is rusted through
  • A bath split right through the body

If in doubt, send pictures and we’ll say what we think before you book.

Materials we repair

  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays
  • Acrylic baths

Should I try a DIY kit first?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.