Leicestershire · England

Bath re-enamelling & resurfacing in Heather, Leicestershire

Full bath re-enamelling and resurfacing in Heather, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Heather

Heather: your questions answered

What does bath re-enamelling cost?

Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up and a photo of the entire item with your LE67 postcode.

Can you re-enamel a roll-top bath?

Yes, often. We resurface the inside, and the outside can be refinished too.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How long does re-enamelling last?

Care for it and it lasts. Avoid abrasive cleaners and suction mats.

Can you price it without visiting?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

Is there any odour?

Expect a mild smell while we are working.

Do you cover Heather?

Yes, we do. Technicians travel to Heather from across the region, with no extra charge for travel.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Bath re-enamelling in Heather without replacing anything

Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We regularly repair basins & shower trays, acrylic baths and pressed steel baths, and the jobs we see most are a roll-top that’s seen better days and an outdated colour you’d like to change.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Basin with yellowed glaze resurfaced to a clean white finish
Location
Heather (LE67)
County
Leicestershire
Cover
12 months on all our work
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026

When to call us in Heather

Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

It’s worth getting a quote if you see:

  • Brown or grey marks that do not clean off
  • An original cast iron bath that needs restoring
  • A coating lifting around the plughole
  • A coloured bath you want in white

What your quote should include

  • How long the guarantee is and what it covers
  • What happens if they find more damage
  • Whether the price covers travel
  • What prep work is covered

How to compare quotes

Covering Heather

Heather is about 3 miles south-west of Coalville, in Leicestershire. Customers in Heather get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover 287 places across Leicestershire, from the larger towns to small villages. We work right across the region, from Heather to Birmingham (25 miles away).

Postcode districts we cover here: LE67. Local streets include Main Street, Manor Road and St John's Close. We also cover the places around Heather: Ibstock (1 mile east), Swepstone (1 mile west), Newton Burgoland (2 miles south-west), Odstone (2 miles south) and Shackerstone (3 miles south). Further out, we also cover Loughborough (10 miles north-east), Hinckley (11 miles south), Wigston (15 miles south-east), Coalville (3 miles north-east), Ashby-de-la-Zouch (4 miles north-west) and Shepshed (8 miles north-east).

Landmarks near Heather

Typical jobs here are in homes near Ibstock Community College, Church of St John the Baptist and Sence Valley Forest Park, among other places. Other landmarks nearby include Shackerstone railway station (2.7 miles south) and Ashby de la Zouch Castle (4 miles north-west). Green spaces nearby include Bardon Hill.

Map of Heather © OpenStreetMap contributors

What we do, step by step

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which usually takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the day after.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Tell us about parking, stairs or access
  • Have a window or extractor fan available

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Send photos for a quote

Advice

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

DIY repairs versus a professional job

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

What affects the price in Heather

Prices start from £350. There is no area surcharge for Heather. What changes the price is:

  • How hard the colour is to match
  • Whether old repairs or coatings need taking off
  • Whether it’s a chip, crack, burn or wear
  • Doing more than one item at once

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.

Send pictures for a quote

Good photos mean an accurate price. Here’s what helps:

  • One picture of the whole bath
  • Where you are, by postcode
  • One sharp close-up of the damage
  • Daylight if possible, and no flash reflection

Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you are under no obligation.

Aftercare tips

Most damage we see is avoidable. These habits help:

  • Avoid suction-cup mats
  • Do not leave bottles, razors or sponges standing on the surface
  • Rinse off hair dye, oils and bath bombs right away
  • Repair dripping taps early

Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.

On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.

When we’d advise against a repair

A repair is not always the answer, and we’ll tell you before we start. Repairs won’t solve:

  • Steel that has corroded right through
  • Acrylic that moves when you stand in it
  • A cast iron or steel bath that is cracked right through

Send us photos and we will tell you honestly before booking.

Surfaces we repair

  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops

Repair or replace: which is better?

There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why Heather clients choose us

  • Colour mixed on the day to match
  • We leave the room as we found it
  • Every repair guaranteed for a year
  • Accredited with CHAS, Constructionline and SafeContractor

See our pricing and bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.