Devon · England
Bath re-enamelling & resurfacing in Nomansland, Devon
Our repair technicians come to Nomansland for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that is seen better days
Work for landlords and builders
For anyone letting property in or around Nomansland, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our bath re-enamelling in Nomansland
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for stains that won’t shift and a roll-top that’s seen better days, in basins & shower trays, pressed steel baths and cast iron baths.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Where
- Nomansland (EX16)
- Area hub
- Devon
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Nomansland
Nomansland is about 8 miles west of Tiverton, in Devon. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover all 586 towns and villages across Devon.
All of EX16 is within our area. Main roads around Nomansland include the B3137, which makes travel easy. We also travel to Witheridge (2 miles west), Rackenford (3 miles north), Thelbridge (3 miles west), Black Dog (3 miles south-west) and Poughill (3 miles south). Larger places within reach include Exeter (15 miles south-east), Tiverton (8 miles east), St Thomas (15 miles south), Larkbeare (15 miles south-east), Polsloe (14 miles south-east) and Cullompton (12 miles east).
Local landmarks in Nomansland
Typical jobs here are in homes near Mount Pleasant Inn and the streets around them. A little further out are Down Castle (2.9 miles south). Not far away are Rackenford and Knowstone Moors.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Dry the bath after use to stop limescale
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Nomansland customers choose us
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- We leave the room as we found it
- Nothing taken out or refitted
See our prices page and bath cost comparison.
How it works
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Mention if the room is upstairs or in a flat
How to get a price
Email us photos of the damage and one of the entire item, and tell us you’re in Nomansland, and we’ll come back with a fixed quote.
Advice
What affects the price in Nomansland
Resurfacing from £350. We do not charge extra for travel to Nomansland. The price depends on:
- What kind of damage it is
- How many areas need work
- How hard the colour is to match
- Previous DIY repairs that have to come out
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can take the photos on your phone, there is no need for anything special. Make sure they show:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- Natural light rather than flash
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Common questions in Nomansland
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we will plan for it.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
When to call us in Nomansland
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is normally as strong as ever.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
- Worn patches where water runs and sits
What to look for in a quote
- The length of the guarantee and what it covers
- What prep work is covered
- Whether a trained technician does the job
- How your room will be protected
Towns and villages near Nomansland
What else we do in Nomansland
About our accreditations · Every repair comes with a one-year guarantee.
