Devon · England
Bath Re-enamelling for Drayford homes
Full bath re-enamelling and resurfacing for homes and businesses in Drayford and across Devon. Send photos for a free, fixed quote.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places

About our bath re-enamelling in Drayford
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on basins & shower trays, Victorian roll-tops and cast iron baths, and people most frequently call us about wear marks under the taps and lots of chips and rust spots.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.

- Location
- Drayford (EX17)
- Area hub
- Devon
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Drayford and nearby
Drayford is about 9 miles north-west of Crediton, in Devon. Wherever you are in the EX17 postcode area, we carry out the work at your property. Drayford is one of 586 towns and villages in Devon where we work.
Postcode districts we cover here: EX17. Close by, we cover Thelbridge (1 mile south-east), Witheridge (2 miles east), Black Dog (3 miles south-east), Nomansland (3 miles east) and Eastington (4 miles south-west). We also work in nearby towns such as Tiverton (11 miles east), Cullompton (15 miles east), Crediton (9 miles south-east), South Molton (9 miles north-west), Pennsylvania (15 miles south-east) and Exwick (14 miles south-east).
What’s near Drayford
Around Drayford, we work in homes near East Worlington Primary School and Church of St Mary and the streets around them. Drayford’s nearest station is Lapford station, about 5 miles south-west of the centre. Other landmarks nearby include Affeton Castle (1.6 miles west).
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Repair dripping taps early
- Do not leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Let us know about parking or access
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you’re under no obligation.
Related advice
Nearby places to Drayford
More services for Drayford
Landlords, agents and businesses in Drayford
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Why repair rather than replace?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why Drayford clients choose us
- One price list for the entire UK
- Colour-matched on site
- Dust sheets down, tidy finish
- Most jobs done in one visit
Take a look at our pricing or bath cost comparison.
Questions from Drayford
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
What a repair can’t fix
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- A metal bath with a through crack
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
When to call us in Drayford
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Keep an eye out for any of the following:
- An old resurfacing that’s failing
- Staining under the taps and around the waste
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
What your quote should include
- A fixed quote, and whether VAT is included
- How to look after the finish
- What protection goes down before work starts
- How long it needs to cure
What affects the price in Drayford
Prices start from £350. There is no charge for travel to Drayford. The price comes down to:
- Whether old repairs or coatings need taking off
- The type of damage
- How much damage there is
- How easy the damage is to reach
Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
You can take the photos on your phone, there’s no need for anything special. Ensure they show:
- Something in shot to show the size
- Natural light rather than flash
- The postcode, so we can plan the visit
- A wider photo showing the whole bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
About our accreditations · Every repair comes with a one-year guarantee.

