Greater London · England
Bath Re-enamelling for North Greenwich homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in North Greenwich. Send photos for a free, fixed quote.
- Resurfacing from £350
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why North Greenwich clients choose us
- We leave the room as we found it
- A year’s guarantee on all work
- Honest advice, even when it means no job
- Fixed prices from your photos
Take a look at our full price list and bath cost comparison.
How we handle bath re-enamelling in North Greenwich
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s a bath in a colour that no longer suits and stains that won’t shift, we can typically put it right, on acrylic baths, pressed steel baths and basins & shower trays alike.
A one-year guarantee comes as standard.
- Area
- North Greenwich (E14, SE8, SE10)
- Region
- Greater London
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near North Greenwich
Also in North Greenwich
Landlord and trade work in North Greenwich
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
When we’d advise against a repair
A repair is not always the answer, and we would rather say so up front. We can’t fix:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
North Greenwich and the surrounding area
North Greenwich is about 1 mile north-west of Greenwich, in Greater London. We visit homes and businesses in North Greenwich, so you don’t need to take anything anywhere. North Greenwich is one of 764 places in Greater London we cover.
Jobs in E14, SE8 and SE10 work the same way as everywhere else we cover. From Creek Road, Wynan Road and Undine Road or a nearby road, we can come to you. We also cover the places around North Greenwich: Isle of Dogs (1 mile south-east), Millwall (1 mile west), Cubitt Town (1 mile north-east), Deptford (1 mile south-west) and Greenwich (1 mile south-east). Larger places within reach include London (3 miles west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (8 miles west), St Pancras (5 miles north-west) and Shoreditch (4 miles north-west).
Around North Greenwich
Our customers here include homes close to Canary Wharf College 3, Harbinger Primary School and Laban Centre. Other local landmarks include St. Paul's (0.7 miles south), The Ferry House Public House (under half a mile south-east), Mudchute Park and Farm (less than half a mile north-east) and Church of St Nicholas (0.5 miles south). For rail, the closest station is Greenwich station, about 0.8 miles south. Nearby you will also find Miller General Hospital (1 mile south) and Old Royal Naval College (0.7 miles south-east). Open spaces near North Greenwich include Sue Godfrey Nature Park and Tower Hill.
- Local facilities include Nunhead (2.1 miles south-west)
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Preparing for the visit
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
How to get a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Common problems we fix in North Greenwich
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Clients usually contact us about:
- Wear marks under the taps
- An old resurfacing that’s failing
- Several chips and rust patches
- A roll-top that is seen better days
What your quote should include
- The length of the guarantee and what it covers
- If travel is included in the price
- A fixed price, and whether VAT is included
- What happens if they find more damage
Keeping it looking good
Looking after the surface is easy:
- Never use suction bath mats
- A quick wipe after use keeps limescale away
- Do not let dyes or oils sit on the finish
- Do not use the bath until it has fully cured
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Your questions about bath re-enamelling in North Greenwich
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Greater London.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do the materials smell?
There may be a mild smell during the work.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
How much does bath re-enamelling cost in North Greenwich?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
About our accreditations · Every repair comes with a one-year guarantee.
