Blackpool · England
Bath Re-enamelling for North Shore homes
Damaged bath in North Shore? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A coloured bath you want in white
- A period or roll-top bath worth keeping
About our bath re-enamelling in North Shore
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Common call-outs are for thin, worn enamel in places and staining under the taps and around the waste, on cast iron baths, basins & shower trays and Victorian roll-tops.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- North Shore (FY1, FY2)
- Region
- Blackpool
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
How the surface is treated afterwards matters:
- A dripping tap should be fixed promptly
- Don’t use the bath until it has fully cured
- Dry the bath after use to stop limescale
- Store bottles off the bath
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It generally takes the best part of a day, and you’re welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Plan for the room to be out of bounds to pets and children
- Keep a parking space free if you can
How to get a price
If you’re in North Shore and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Other services in North Shore
Your questions about bath re-enamelling in North Shore
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you cover North Shore?
We do. We send a technician to North Shore for every job, and the price is the same as everywhere else.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
What a repair cannot fix
A repair is not right for every job, including:
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Materials we work on in North Shore
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Repair or replace in North Shore?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
What you get with us
- No need to remove anything
- Rooms protected and left tidy
- Most jobs done in one visit
- CHAS and Constructionline accredited
See our prices page and resurfacing vs replacement cost guide.
What we are called out for in North Shore
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
These are the problems we are asked about most:
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
What your quote should include
- Whether cleaning and preparation are in the price
- How soon you can use it again
- How to look after the finish
- How the room is protected while they work
North Shore and the surrounding area
North Shore is about 1 mile north-west of Blackpool, in Blackpool. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. We work in 12 places across Blackpool. Our nearest city page is Liverpool, about 30 miles away.
Jobs in FY1 and FY2 are booked in the same way as anywhere else. Local streets include Links Road, Gynn Avenue and Redcar Road. We also cover the places around North Shore: Warbreck (1 mile east), Layton (1 mile east), Bispham (1 mile north-east), Blackpool (1 mile south-east) and Great Marton (2 miles south-east). Within a short drive, we also cover Squires Gate (4 miles south), Marton (3 miles south-east), Starr Gate (4 miles south), South Shore (3 miles south) and Staining (3 miles east).
Around North Shore
Locally, our jobs take us to homes close to St Thomas' Church, St Paul's Worship Centre and Holy Family Catholic Primary School and the streets around them. You will also find Devonshire Primary Academy (1 mile south-east) and Devonshire Road Rock Gardens (1.3 miles north-east). North Shore’s nearest station is Blackpool North station, about 0.8 miles south-east. Well-known places in the area include Houndshill Shopping Centre (1.2 miles south) and Blackpool Victoria Hospital (1.8 miles south-east). Open spaces near North Shore include Marton Mere.
About our accreditations · Every repair comes with a one-year guarantee.
