Blackpool · England
Bath Re-enamelling for Great Marton homes
Full bath re-enamelling and resurfacing for homes and businesses in Great Marton and across Blackpool. Free, fixed quotes from your photos.
- Resurfacing from £350
- Chips and rust in more than one place
- Wear marks under the taps
Landlords, agents and businesses in Great Marton
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Bath re-enamelling in Great Marton without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. Common call-outs are for stains that won’t shift and a roll-top that’s seen better days, on basins & shower trays, Victorian roll-tops and acrylic baths.
Big or small, you get the same one-year guarantee.
- Location
- Great Marton (FY3, FY1, FY4)
- Region
- Blackpool
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Other services in Great Marton
How it works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Tell us about any previous repairs or coatings
- Let the surface dry out before the visit
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Advice
Covering Great Marton
Great Marton is about 1 mile south-east of Blackpool, in Blackpool. From the centre of Great Marton to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Great Marton is one of 12 places in Blackpool where we work. You can also see our page for Liverpool, about 28 miles away.
We cover every part of FY3, FY1 and FY4. From Breck Road, Gorse Road and Tyne Avenue or anywhere nearby, a technician can come to you. Neighbouring places we cover include Blackpool (1 mile north-west), Layton (2 miles north), Warbreck (2 miles north), North Shore (2 miles north-west) and Bispham (3 miles north).
Landmarks near Great Marton
Our customers here include homes close to St Paul's Church, Elmslie School and Devonshire Primary Academy. Other local landmarks include St John Vianney's Catholic Primary School (0.6 miles south-west), St Thomas' Church (1 mile north-west), Raikes Hall Hotel (0.8 miles north-west) and Stanley Park (less than half a mile north-west). Great Marton’s nearest station is Blackpool North station, roughly 1.3 miles north-west. A little further out are Blackpool Victoria Hospital (0.7 miles north-east) and Houndshill Shopping Centre (1.3 miles west). Open spaces near Great Marton include Marton Mere.
Your questions about bath re-enamelling in Great Marton
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Do you come to Great Marton?
Yes, we do. We send a technician to Great Marton for every job, and the price is the same as everywhere else.
Which areas do you work in?
All of Blackpool, and the rest of the UK. Travel is included in the price.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- What kind of damage it is
- The size and number of damaged areas
- How hard the colour is to match
Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
- What it’s made of, if you know
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Do not leave a chip unrepaired
- Fix dripping taps quickly
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
When to call us in Great Marton
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, typically first under the taps and around the waste.
Clients normally contact us about:
- Chips and rust in more than one place
- A coating lifting around the plughole
- A bath in a colour that no longer suits
- Wear marks under the taps
What to look for in a quote
- How long the guarantee is and what it covers
- When it can be used again
- What aftercare is recommended
- Who turns up on the day
What a repair can’t fix
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
- A bath that is rusted through
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the following day. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Honest advice, even when it means no job
- Work done at your home or business
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or resurfacing vs replacement cost guide.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
