Blackpool · England
Bath re-enamelling & resurfacing in Marton, Blackpool
Fixed-price bath re-enamelling in Marton and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Stains that won’t shift
- A coating lifting around the plughole
Do you need bath re-enamelling in Marton?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Customers generally contact us about:
- Staining under the taps and around the waste
- A roll-top that’s seen better days
- Wear marks under the taps
- A bath in a colour that no longer suits
Questions to ask before you book
- How soon you can use it again
- Aftercare advice
- What prep work is covered
- A fixed quote, and whether VAT is included
Bath re-enamelling in Marton, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with thin, worn enamel in places and an old resurfacing that’s failing, we can usually put it right, on cast iron baths, Victorian roll-tops and basins & shower trays alike.
All our work is covered by our one-year guarantee.
- Area
- Marton (FY4, FY3, FY1)
- County
- Blackpool
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Marton
What else we do in Marton
What a repair can’t fix
In fairness, some problems need a different fix:
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Repair or replace: which is better?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Marton
- One visit for most repairs
- Everything repaired in place
- Rooms protected and left tidy
- Honest advice, even when it means no job
Read our pricing or guide to resurfacing and replacement costs.
FAQs for Marton
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
What happens after I send photos?
We review the pictures and send a fixed quote and the next dates we have.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Can you repair several things at once?
Of course, and it typically saves money. Send pictures of everything together and we will quote them together.
Are there extra charges for Marton?
There is no separate call-out charge. Your fixed price includes everything.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Do you cover the whole of Blackpool?
The entire UK, including all of Blackpool. Just include your postcode and we’ll confirm dates.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Dry the bath after use to stop limescale
- Rinse off hair dye, oils and bath bombs immediately
- Store bottles off the bath
- Avoid suction-cup mats
Wipe the bath dry after use where you can, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Landlord and trade work in Marton
If you manage property in Marton, we will quote for several properties at once. Just send photos for each address and we will come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Marton and nearby
Marton is about 1 mile south-east of Blackpool, in Blackpool. Wherever you are in the FY4 postcode area, a technician comes to you. We cover 12 places across Blackpool, from the larger towns to small villages. You can also see our page for Liverpool, about 27 miles away.
All of FY4, FY3 and FY1 is within our area. Whether you live on Acton Road, Bean Avenue and Howe Avenue or anywhere nearby, we can come to you. We also travel to Squires Gate (1 mile south-west), South Shore (2 miles west), Starr Gate (2 miles south-west), Lytham St Anne's (3 miles south) and St Annes (3 miles south). Further out, we also cover Layton (3 miles north), Warbreck (3 miles north) and North Shore (3 miles north-west).
Landmarks near Marton
Typical jobs here are in homes near Marton Primary Academy and Nursery, St. George's Church of England High School and Elmslie School, among other places. You’ll also find St Christopher & St Nicholas (0.6 miles south-west) and Stanley Park (1.3 miles north). For rail, the closest station is Blackpool South station, roughly 1.2 miles west of the centre. Nearby you will also find Brooks Collectables And Museum (1.5 miles west) and Blackpool Victoria Hospital (1.7 miles north). Not far away are Marton Mere.
How it works
Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Allow most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the following day.
How to prepare
- Keep pets and children out of the room while we work
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Read more
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
