Medway · England
Bath re-enamelling & resurfacing in North Street, Medway
Full bath re-enamelling and resurfacing for homes and businesses in North Street and across Medway. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- A dull, rough surface that will not come clean
How we handle bath re-enamelling in North Street
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. We regularly repair cast iron baths, basins & shower trays and pressed steel baths, and people most frequently call us about a dull, rough surface that won’t come clean and a roll-top that’s seen better days.
Every job is backed for twelve months in North Street and everywhere else. If something goes wrong with the work, we come back.
- Where
- North Street (ME3)
- County
- Medway
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
Some jobs are not right for a repair, including:
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
- Problems we cannot see until an old finish comes off
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Do you need bath re-enamelling in North Street?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The most common problems we are called about are:
- Enamel that is lost its shine and feels rough
- Stains that will not shift
- An original cast iron bath that needs restoring
- A coloured bath you want in white
What your quote should include
- The length of the guarantee and what it covers
- When it can be used again
- How your room will be protected
- Who will actually do the work
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Keep suction mats out of the bath
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
Dry the bath after use if possible, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About North Street
North Street is about 5 miles north of Gillingham, in Medway. Customers in North Street get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. North Street is one of 68 places in Medway we cover. We work right across the region, from North Street to London (30 miles away).
Here we cover the ME3 postcode area. We also travel to Tunbridge Hill (1 mile south-west), Kingsnorth (1 mile south), Stoke (1 mile north-east), Fenn Street (1 mile north-west) and Sharnal Street (1 mile west). Larger places within reach include Gillingham (5 miles south), Chatham (7 miles south-west), Rochester (6 miles south-west), Rainham (5 miles south), Strood (6 miles south-west) and Luton (6 miles south-west).
Local landmarks in North Street
Typical jobs here are in homes near The White Horse pub and Church of St Peter and St Paul. For rail, the closest station is Gillingham (Kent) station, roughly 4.2 miles south-west. Other landmarks nearby include Medway Maritime Hospital (4.9 miles south-west) and Upnor Castle (4 miles south-west). Green spaces nearby include Bishop Saltings.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- The size and number of damaged areas
- Unusual colours or finishes
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, so there is no premium for North Street. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed price
It only takes a minute to photograph the damage. Try to send:
- A photo taken from further back
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Something in shot to show the size
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes most of the day. We clean up when we’re done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Open a window if you can
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Related advice
Landlord and trade work in North Street
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Nearby places to North Street
Also in North Street
North Street: your questions answered
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can you quote from pictures?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
