Hampshire · England
Bath re-enamelling & resurfacing in Northbrook, Hampshire
Full bath re-enamelling and resurfacing in Northbrook, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Thin, worn enamel in places
How we handle bath re-enamelling in Northbrook
If your bath is sound but looks tired, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Whether it’s enamel that’s lost its shine and feels rough and lots of chips and rust spots, we can help.
You’re covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Location
- Northbrook (SO21)
- Region
- Hampshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Northbrook. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- Colours mixed by hand to suit your surface
- Dust sheets down, tidy finish
- One price list for the entire UK
- CHAS, Constructionline and SafeContractor accredited
Read our full price list or resurfacing vs replacement cost guide.
Covering Northbrook
Northbrook is about 7 miles north of Winchester, in Hampshire. Jobs in Northbrook are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Our repair technicians cover all 683 towns and villages in Hampshire. Our jobs stretch from Northbrook to London (56 miles away).
All of SO21 is covered, from the main roads to the quietest streets. Nearby, we also work in Micheldever (1 mile south-east), Stoke Charity (1 mile west), Hunton (2 miles west), Micheldever Station (2 miles north) and East Stratton (2 miles east). Within a short drive, we also cover Basingstoke (11 miles north-east), Winchester (7 miles south), Eastleigh (13 miles south), Andover (10 miles north-west), Chandler's Ford (13 miles south-west) and Alton (13 miles east).
Around Northbrook
Typical jobs here are in homes near Church of St Mary, Micheldever CofE Primary School and Half Moon and Spread Eagle pub and the streets around them. The nearest railway station is Micheldever station, about 2.1 miles north of the centre.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
What we’re called out for in Northbrook
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
These are the problems we’re asked about most:
- Thin, worn enamel in places
- Staining under the taps and around the waste
- A coloured bath you want in white
- A bath that stays dull however much you clean it
Questions to ask before you book
- Whether a trained technician does the job
- How your room will be protected
- How soon you can use it again
- Whether they match the colour on site
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- Any earlier repairs that need removing first
- How easy the damage is to reach
- How much damage there is
- Unusual colours or finishes
Set against the cost of replacement, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send photos for a quote
You can take the photos on your phone. Just ensure we can see:
- Where you are, by postcode
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- A wider photo showing the whole bath
Upload photos of the damage and a wider shot of the whole item, with your SO21 postcode, and we’ll come back with a fixed quote.
Also near Northbrook
More services for Northbrook
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which typically takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the day after.
Before we arrive
- Let us know which floor the room is on
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Landlord and trade work in Northbrook
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Your questions about bath re-enamelling in Northbrook
What areas do you cover?
All of Hampshire, and the rest of the UK. Travel is included in the price.
What happens after I send photos?
You will get a fixed quote back, plus dates. There’s no obligation to book.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Do you come to Northbrook?
We do. Technicians travel to Northbrook from across the region, and the price is the same as everywhere else.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
About our accreditations · Every repair comes with a one-year guarantee.
