Greater London · England

Bath Re-enamelling in Northumberland Heath

Bath re-enamelling across Northumberland Heath and nearby, generally in one visit and guaranteed for a year.

  • Resurfacing from £350
  • A bath that stays dull however much you clean it
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Northumberland Heath

Bath re-enamelling in Northumberland Heath without replacing anything

We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. Whether it’s a roll-top that’s seen better days and several chips and rust patches, we can help, on cast iron baths, basins & shower trays and Victorian roll-tops alike.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Area
Northumberland Heath (DA8, DA7)
Area hub
Greater London
Guarantee
One year on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

Prices and what affects them

Prices start from £350. There’s no charge for travel to Northumberland Heath. The price comes down to:

  • Access to the area
  • How many items we do on one visit
  • The material
  • Previous DIY repairs that have to come out

Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.

Send pictures for a quote

It only takes a minute to photograph the damage. Try to send:

  • The postcode, so we can plan the visit
  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • What it’s made of, if you know

If you are in Northumberland Heath and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Covering Northumberland Heath

Northumberland Heath is about 3 miles north-west of Dartford, in Greater London. Whether you are in the middle of Northumberland Heath or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Northumberland Heath is one of 764 places in Greater London we cover. Our nearest city page is London, about 11 miles away.

Every address in DA8 and DA7 is covered. Local streets include Mill Road, Penda Road and Chalk Road, and we cover them all. If you are just outside Northumberland Heath, we cover Bexley Riverside (1 mile south-east), Erith (1 mile north), Barnehurst (1 mile south), Belvedere (1 mile north-west) and Lessness Heath (1 mile north-west). Further out, we also cover London (11 miles west), City of Westminster (14 miles west), Marylebone (14 miles west), St Pancras (13 miles west), Shoreditch (11 miles west) and Walthamstow (11 miles north-west).

Near you in Northumberland Heath

Typical jobs here are in homes near King Henry School, Trinity School and St Paul's, among other places. Nearby too are Barnehurst Infant School (under half a mile south-west), The Royal Oak pub (under half a mile west) and Braeburn Park (1.9 miles south). Northumberland Heath’s nearest station is Barnehurst station, roughly 0.6 miles south-west. Other landmarks nearby include Erith and District Hospital (within half a mile north) and Broadway Shopping Centre (1.5 miles south-west). The countryside around Northumberland Heath includes Crossness Nature Reserve.

  • Parks and local facilities nearby include Colyers (less than half a mile south-east)
Map of Northumberland Heath © OpenStreetMap contributors

For landlords and businesses

If you manage property in Northumberland Heath, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.

We work for landlords, letting agents and housing providers in Northumberland Heath as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.

How the visit works

You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we are doing. Most jobs take most of the day, and you are welcome to carry on with your day while we work.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Mention any parking restrictions or tricky access
  • Clear the area around the damage

Getting a price

Most clients in Northumberland Heath get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Get a free quote

Related advice

Keeping it looking good

Good habits make a big difference to how long a repair lasts:

  • Wipe the bath dry after use in hard water areas
  • Don’t leave a chip unrepaired
  • Leave the bath for the full curing time before using it
  • Avoid suction-cup mats

Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.

Different materials, different repairs

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.

FAQs for Northumberland Heath

How long will the bath be out of use?

Usually one day, with the bath ready the next day. A badly pitted bath can need a second day.

Does re-enamelling smell?

Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.

Can you quote from pictures?

Typically, yes. Clear photos let us give you a fixed quote without visiting.

How quickly can you book me in?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

What if the damage is worse than the photos show?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Is there any odour?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Repairing versus replacing in Northumberland Heath

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Why choose Surface Doctor in Northumberland Heath

  • Accredited with CHAS, Constructionline and SafeContractor
  • Dust sheets down, tidy finish
  • Same prices wherever you are
  • We come to you, anywhere in the UK

Take a look at our full price list or guide to resurfacing and replacement costs.

What we are called out for in Northumberland Heath

Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is normally perfectly sound.

Keep an eye out for these signs:

  • Wear marks under the taps
  • Enamel that is lost its shine and feels rough
  • Brown or grey marks that don’t clean off
  • An original cast iron bath that needs restoring

Before booking anyone

  • What preparation is included
  • How soon you can use it again
  • What protection goes down before work starts
  • Who turns up on the day

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.