North Somerset · England

Bath re-enamelling & resurfacing in Norton's Wood, North Somerset

Full bath re-enamelling and resurfacing at your home in Norton's Wood, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Norton's Wood

Honest limits

We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • Damage hidden under a previous coating, until it’s stripped back
  • A cast iron or steel bath that’s cracked right through
  • A poorly supported acrylic bath, until it’s firmed up

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays

How we handle bath re-enamelling in Norton's Wood

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Common call-outs are for an original cast iron bath that needs restoring and a peeling or bubbling previous coating, on basins & shower trays, pressed steel baths and cast iron baths.

Every repair is covered by a one-year guarantee.

Where
Norton's Wood (BS21)
County
North Somerset
Cover
A year, on every repair
Price
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Do not let dyes or oils sit on the finish
  • Stick to gentle, non-abrasive cleaners
  • Store bottles off the bath
  • Avoid suction-cup mats

Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.

Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.

Should you replace it?

Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. Our prices are the same across the UK, so there is no premium for Norton's Wood. The job itself decides the price: the material, the amount of damage and how many items.

Why Norton's Wood customers choose us

  • Repair technicians who travel to you, UK-wide
  • One visit for most repairs
  • Everything repaired in place
  • Every repair guaranteed for a year

Take a look at our prices page or resurfacing vs replacement cost guide.

Common questions in Norton's Wood

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

Will the new finish last?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

Can you do the outside of a roll-top?

Yes. We can do the inside and outside.

How do I book?

Use the quote form or ring 0345 017 0787, and we will take it from there.

How much does bath re-enamelling cost in Norton's Wood?

Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.

Is a repair better than a new one?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Should I try a DIY kit first?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Where we work around Norton's Wood

Norton's Wood is about 2 miles north-east of Clevedon, in North Somerset. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Norton's Wood is one of 86 places in North Somerset where we work.

Jobs in BS21 are booked in the same way as anywhere else. Neighbouring places we cover include Walton in Gordano (1 mile north-west), Walton Bay (1 mile north), Clevedon (2 miles south-west), Redcliffe Bay (2 miles north) and Kenn (2 miles south). Within a short drive, we also cover Weston-super-Mare (9 miles south-west), Portishead (3 miles north-east), Nailsea (3 miles south-east), Milton (8 miles south-west), Yatton (4 miles south) and Worle (8 miles south-west).

Near you in Norton's Wood

Our customers here include homes close to Church of St Paul, Clevedon School and All Saints East Clevedon Church of England Primary School, among other places. The nearest railway station is Nailsea & Backwell station, about 3.5 miles south-east. Nearby you will also find North Somerset Community Hospital (1.4 miles south-west). Open spaces near Norton's Wood include Clapton Moor and Backwell Lake.

Map of Norton's Wood © OpenStreetMap contributors

What affects the price in Norton's Wood

Resurfacing from £350. You’ll know the full cost before booking. We look at:

  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it
  • The material
  • Unusual colours or finishes

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Getting a price from photos

When you take your pictures, a few simple things make all the difference:

  • The material, if you know it
  • One sharp close-up of the damage
  • A wider photo showing the whole bath
  • Where you are, by postcode

To get a price, send two or three pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

For landlords and businesses

For anyone letting property in or around Norton's Wood, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.

Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

What happens on the day

Arrival times are agreed in advance, so you’re not left guessing. On site, it takes the best part of a day in most cases. We leave the room clean.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Before we arrive

  • Let us know about parking or access
  • Clear toiletries, mats and anything else from around the area
  • Make sure the room can be ventilated

How to get a price

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a free quote

Read more

Do you need bath re-enamelling in Norton's Wood?

Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.

You may need us if you’ve spotted any of these:

  • An old resurfacing that is failing
  • Enamel that’s lost its shine and feels rough
  • An original cast iron bath that needs restoring
  • Stains that won’t shift

What to look for in a quote

  • What aftercare is recommended
  • What the guarantee covers, and for how long
  • How long it needs to cure
  • How the colour is matched

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.