North Somerset · England
Bath re-enamelling & resurfacing in Redcliffe Bay, North Somerset
Bath re-enamelling for Redcliffe Bay, without a refit. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A coloured bath you want in white
Common problems we fix in Redcliffe Bay
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
If you can see any of these, send us a picture:
- A peeling or bubbling previous coating
- Lots of chips and rust spots
- A roll-top that is seen better days
- Brown or grey marks that don’t clean off
Questions to ask before booking
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- How changes to the job are handled
- How the colour is matched
Bath re-enamelling in Redcliffe Bay, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Taps, tiles, panels and plumbing all stay in place. We work on pressed steel baths, cast iron baths and acrylic baths, and people most often call us about an original cast iron bath that needs restoring and a coating lifting around the plughole.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Redcliffe Bay (BS20, BS21)
- Area hub
- North Somerset
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Rinse off hair dye, oils and bath bombs right away
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
- Don’t leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
How the visit works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take the best part of a day.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Related advice
Nearby places to Redcliffe Bay
Other services in Redcliffe Bay
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The colour and finish to match
- Whether we combine several jobs
- How easy the damage is to reach
- How much damage there is
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
How to get a fixed quote
When you take your photos, these tips help us give you a firm price:
- A clear, close picture of the problem area
- One picture of the entire bath
- Details of any past repairs
- The material, if you know it
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Where we work around Redcliffe Bay
Redcliffe Bay is about 1 mile west of Portishead, in North Somerset. Across the BS20 area, we carry out the work at your property. We cover all 86 towns and villages across North Somerset. We work right across the region, from Redcliffe Bay to Birmingham (about 79 miles away).
Postcode districts we cover here: BS20 and BS21. That includes homes on Down Road, Tower Road and King's Road. Other places close to Redcliffe Bay include Walton Bay (1 mile south-west), Walton in Gordano (2 miles south-west), Norton's Wood (2 miles south), Clevedon (4 miles south-west) and Kenn (4 miles south). We also work in nearby towns such as Weston-super-Mare (11 miles south-west), Nailsea (4 miles south-east), Milton (10 miles south-west), Yatton (6 miles south), Worle (10 miles south-west) and Locking (11 miles south-west).
Near you in Redcliffe Bay
Typical jobs here are in homes near St Nicholas' Church, Gordano School and High Down Infant School and the streets around them. Redcliffe Bay’s nearest station is Nailsea & Backwell station, about 4.4 miles south-east of the centre. Nearby you will also find Oakham Treasures (3.7 miles east) and North Somerset Community Hospital (3.3 miles south-west). Not far away are Tickenham Hill and Backwell Lake.
Common questions in Redcliffe Bay
Can landlords book you?
Yes, frequently. We can quote for several properties together and work between tenancies.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
How do I get a price for bath re-enamelling in Redcliffe Bay?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote.
What a repair can’t fix
Some jobs are not right for a repair, for example:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Repairing versus replacing in Redcliffe Bay
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Same prices wherever you are
- One visit for most repairs
- Dust sheets down, tidy finish
- Colour mixed on the day to match
Take a look at our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
