North Somerset · England
Bath re-enamelling & resurfacing in Kenn, North Somerset
We travel to Kenn for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Bath re-enamelling at your home in Kenn
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Common call-outs are for thin, worn enamel in places and a coloured bath you want in white, on acrylic baths, cast iron baths and pressed steel baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Location
- Kenn (BS21)
- Area hub
- North Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Kenn
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you come to Kenn?
Yes. We work across the UK and come to Kenn. Send us photos for a fixed quote, or call 0345 017 0787.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
How much does bath re-enamelling cost in Kenn?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Kenn and the surrounding area
Kenn is about 1 mile south-east of Clevedon, in North Somerset. Customers in Kenn get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our technicians cover 86 places in North Somerset.
Here we cover the BS21 postcode area. We regularly work on streets such as Kenn Street, Duck Lane and Kenn Road and the roads around them. We also cover the places around Kenn: North End (1 mile south), Clevedon (1 mile north-west), Norton's Wood (2 miles north), Walton in Gordano (3 miles north) and Walton Bay (3 miles north). Within a short drive, we also cover Weston-super-Mare (7 miles south-west), Portishead (5 miles north-east), Nailsea (3 miles east), Milton (6 miles south-west), Worle (6 miles south-west) and Locking (6 miles south-west).
What’s near Kenn
Typical jobs here are in homes near Yeo Moor Primary School, Church of St John the Evangelist and Drum & Monkey pub and the streets around them. Other local landmarks include Saint Andrews Infants School (1.4 miles north) and Clevedon School (2.1 miles north). For rail, the closest station is Yatton station, roughly 1.9 miles south of the centre. Well-known places in the area include North Somerset Community Hospital (1.4 miles north) and Castle Batch (4.9 miles south-west). Open spaces near Kenn include Blake's Pools and Backwell Lake.
Honest limits
To be straight with you, some problems need a different fix:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
What we do, step by step
We agree an arrival time beforehand. On site, it takes most of the day for most jobs. We leave the room clean and ready to use once it has cured.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
- Let us know about parking or access
How to get a price
The quickest way to a price is to send two or three photos through our quote form or ring us. We will say straight away whether it can be repaired.
Advice
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Other services in Kenn
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- Where the damage is and how we get to it
- How hard the colour is to match
- Any earlier repairs that need removing first
- What the surface is made of
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Send photos for a quote
We price nearly every job from pictures. This is what to send:
- A coin beside the damage so we can judge size
- The material, if you know it
- Natural light rather than flash
- A photo taken from further back
For a price in Kenn, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Signs you need bath re-enamelling in Kenn
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
People normally call us after spotting one of these:
- Stains that won’t shift
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
Questions to ask before booking
- How changes to the job are handled
- Whether there are any call-out or travel charges
- How the room is protected while they work
- What preparation is included
Aftercare tips
Most damage we see is avoidable. These habits help:
- A quick wipe after use keeps limescale away
- Don’t let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t use the bath until it has fully cured
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You’ll see the full price before you book.
What you get with us
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- Same prices wherever you are
- Colour mixed on the day to match
Read our prices page or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
