Wiltshire · England
Bath re-enamelling & resurfacing in Oare, Wiltshire
Bath re-enamelling across Oare and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- A coating lifting around the plughole
About our bath re-enamelling in Oare
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We regularly repair acrylic baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are worn patches where water runs and sits and staining under the taps and around the waste.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Oare (SN8)
- County
- Wiltshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Oare and nearby
Oare is about 9 miles east of Devizes, in Wiltshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 425 towns and villages in Wiltshire, from the larger towns to small villages. Our nearest city page is London, about 73 miles away.
All of SN8 is within our area. You will find streets such as Pound Lane and Rudge Lane, all of which we cover. Other places close to Oare include Wilcot (2 miles south-west), Pewsey (2 miles south), Milton Lilbourne (2 miles south-east), Wootton Rivers (2 miles east) and Manningford Abbots (3 miles south-west). Further out, we also cover Calne (11 miles north-west), Devizes (9 miles west), Melksham (15 miles west), Amesbury (14 miles south), Marlborough (4 miles north-east) and Bulford (12 miles south).
Near you in Oare
Our customers here include homes close to Pewsey Vale School, Church of the Holy Trinity and The White Hart pub. Oare’s nearest station is Pewsey station, roughly 1.6 miles south of the centre. Nearby you will also find Pewsey Heritage Centre (1.8 miles south) and Savernake Hospital (4.5 miles north-east). The countryside around Oare includes Knap Hill.
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take most of the day. We clean up when we are done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Open a window if you can
- Keep pets and children out of the room while we work
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- Unusual colours or finishes
- How easy the damage is to reach
- The type of damage
- How much damage there is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Where you are, by postcode
- A clear, close picture of the problem area
- A picture taken from further back
- Details of any past repairs
To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Oare questions
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
How much does bath re-enamelling cost in Oare?
Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the entire item with your SN8 postcode.
Will there be a smell?
There may be a mild smell during the work.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
What happens after I send pictures?
We come back with a fixed price. There is no obligation to book.
Nearby places to Oare
What else we do in Oare
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Repair or replace in Oare?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Work done at your home or business
- One-year guarantee on every repair
- Nothing taken out or refitted
- Colour mixed on the day to match
Read our pricing and guide to resurfacing and replacement costs.
Common problems we fix in Oare
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Contact us if you’ve noticed:
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
- Thin, worn enamel in places
- Brown or grey marks that do not clean off
What to look for in a quote
- How the room is protected while they work
- What aftercare is recommended
- Whether the price is fixed and includes VAT
- Who turns up on the day
Work for landlords and builders
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
