Greater London · England
Bath re-enamelling & resurfacing in Old Oak Common, Greater London
Our technicians come to Old Oak Common for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that do not clean off
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
About our bath re-enamelling in Old Oak Common
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s brown or grey marks that don’t clean off and a roll-top that’s seen better days, we can normally put it right, whatever the material.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Old Oak Common (NW10, W3, NW26)
- Area hub
- Greater London
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Why choose Surface Doctor in Old Oak Common
- One visit for most repairs
- No need to remove anything
- CHAS and Constructionline accredited
- Same prices wherever you are
Take a look at our prices page or bath cost comparison.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Where we work around Old Oak Common
Old Oak Common is about 1 mile south of Harlesden, in Greater London. We travel to homes and businesses in Old Oak Common and nearby villages, so nothing has to leave your home. Old Oak Common is one of 764 places in Greater London we cover. You can also see our page for London, about 7 miles away.
We work across the NW10, W3 and NW26 postcode area. Streets in the area include Atlas Road, Tubbs Road and Waldo Road, and we cover them all. If you’re just outside Old Oak Common, we cover College Park (1 mile north-east), Harlesden (1 mile north), Kensal Green (1 mile east), Park Royal (1 mile west) and North Kensington (1 mile east). We also work in nearby towns such as London (7 miles east), City of Westminster (4 miles east), Marylebone (4 miles east), Kensington (3 miles south-east), St Pancras (6 miles east) and Shoreditch (7 miles east).
Landmarks near Old Oak Common
In Old Oak Common, that means homes near Star Chamber Academy, Green Man Public House and Library for Iranian Studies. Nearby too are Church of Eritrean Orthodox Brent (0.5 miles north-east), St Claudine's Catholic School for Girls (0.8 miles north), Little Wormwood Scrubs (0.8 miles east) and Old Oak Primary School (0.6 miles south). Old Oak Common has its own railway station: Willesden Junction station. A little further out are Middlesex (1.4 miles north-west) and Westfield London (1.7 miles south-east). For a walk, there’s Hanger Hill Wood and Campden Hill.
What we can’t put right
Some jobs aren’t right for a repair, including:
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
The process
We begin by going over the job with you, so you know exactly what we’re doing. After that, protection goes down around the work area and the work begins. It normally takes most of the day, and we will tell you if anything changes.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
Old Oak Common: your questions answered
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Do you work in Old Oak Common?
Yes. We cover the whole UK and come to Old Oak Common. Send pictures and we will quote, or call 0345 017 0787.
Landlords, agents and businesses in Old Oak Common
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Signs you need bath re-enamelling in Old Oak Common
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Keep an eye out for any of the following:
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- Staining under the taps and around the waste
Before you book anyone
- Whether cleaning and preparation are in the price
- How to look after the finish
- Whether the price is fixed and includes VAT
- When it can be used again
How to care for the repair
So the finish stays in good condition for years:
- Dry the bath after use to stop limescale
- Avoid suction-cup mats
- Wash away dyes and oils after use
- Don’t leave a chip unrepaired
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Towns and villages near Old Oak Common
Also in Old Oak Common
About our accreditations · Every repair comes with a one-year guarantee.
