East Riding of Yorkshire · England
Bath Re-enamelling in Ottringham
Bath re-enamelling in Ottringham without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A coloured bath you want in white
Work for landlords and builders
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Bath re-enamelling at your home in Ottringham
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s a bath that stays dull however much you clean it and a peeling or bubbling previous coating, we can help, on basins & shower trays, cast iron baths and acrylic baths alike.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- Ottringham (HU12)
- County
- East Riding of Yorkshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Ottringham: your questions answered
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
Our work in Ottringham
Ottringham is about 10 miles north of Grimsby, in East Riding of Yorkshire. Anywhere in HU12, we come to you. We cover 299 places in East Riding of Yorkshire, from the larger towns to small villages. Our jobs stretch from Ottringham to Leeds (about 61 miles away).
Our visits in HU12 are booked in the same way as anywhere else. Whether you live on Station Road, New Road and Chapel Lane or anywhere nearby, a technician can come to you. Close by, we cover Winestead (2 miles east), Halsham (2 miles north), Rimswell (4 miles north-east), Roos (4 miles north) and Withernsea (5 miles east). We also work in nearby towns such as Hessle (15 miles west), Cottingham (15 miles west), Hornsea (15 miles north), Hedon (5 miles north-west), Anlaby (15 miles west) and Willerby (15 miles west).
Landmarks near Ottringham
Around Ottringham, we work in homes near Church of St Wilfred, among other places. Nearby you will also find Burstwick Castle (4.1 miles north-west) and Withernsea Hospital (4.9 miles east).
What we’re called out for in Ottringham
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Most people get in touch when they notice one of these:
- Staining under the taps and around the waste
- An outdated colour you’d like to change
- Several chips and rust patches
- A coating lifting around the plughole
What your quote should include
- How to look after the finish
- How long it needs to cure
- How changes to the job are handled
- How the room is protected while they work
How it works
We work cleanly and quietly. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about parking, stairs or access
- Tell us if there are stairs or a lift
- Open a window if you can
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and you are under no obligation.
Read more
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. We charge the same wherever you are, with no extra for Ottringham. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Most jobs done in one visit
- Everything repaired in place
- Colour-matched on site
- One-year guarantee on every repair
Take a look at our pricing or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- Unusual colours or finishes
- The size and number of damaged areas
- Where the damage is and how we get to it
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
How to get a fixed price
The better the photos, the more accurate the price. Here’s what helps:
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- The material, if you know it
Upload photos of the damage and a wider shot of the entire item, with your HU12 postcode, and we will reply with a fixed price.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Other services in Ottringham
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
