East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Willerby, East Riding of Yorkshire
Bath re-enamelling for Willerby, without a refit. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
About our bath re-enamelling in Willerby
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We regularly repair acrylic baths, basins & shower trays and pressed steel baths, and common reasons people get in touch are an outdated colour you’d like to change and wear marks under the taps.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Willerby (HU10)
- Region
- East Riding of Yorkshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Willerby
We work for landlords, letting agents and housing providers in Willerby as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
What we do, step by step
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a full day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Tell us about parking, stairs or access
- Point us to the nearest place to park
- Ensure the area is dry
Ask for a price
Upload a picture of the damage and a wider shot of the whole item, with your HU10 postcode, and we will come back with a fixed quote.
Advice
Repair or replace in Willerby?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why us?
- Same prices wherever you are
- Colour mixed on the day to match
- Straight answers about what a repair can do
- Most jobs done in one visit
Take a look at our full price list or guide to resurfacing and replacement costs.
Willerby: your questions answered
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you cover Willerby?
Yes, we do. We send a technician to Willerby for every job, and the price is the same as everywhere else.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Do you need bath re-enamelling in Willerby?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
It’s worth getting a quote if you see:
- Several chips and rust patches
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- Enamel that’s lost its shine and feels rough
Questions to ask before booking
- What happens if they find more damage
- Whether the colour is mixed to match
- How the room is protected while they work
- What aftercare is recommended
What bath re-enamelling costs
Prices start from £350. You will know the full cost before booking. We look at:
- What the surface is made of
- The colour and finish to match
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
How to get a fixed quote
Before you send photos, these tips help us give you a firm price:
- The material, if you know it
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Honest limits
Some jobs aren’t right for a repair, including:
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Problems we can’t see until an old finish comes off
If in doubt, send pictures and we will say what we think.
Materials we work on in Willerby
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Can I fix it myself?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Willerby and nearby
Willerby is about 4 miles west of Kingston upon Hull, in East Riding of Yorkshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 299 towns and villages in East Riding of Yorkshire. Our jobs stretch from Willerby to Leeds (about 46 miles away).
Here we cover the HU10 postcode area. We regularly work on streets such as Main Street, Hawthorne Avenue and Overton Avenue. Close by, we cover Kirk Ella (1 mile west), Anlaby (1 mile south), Anlaby Common (1 mile south-east), West Ella (1 mile west) and Anlaby Park (2 miles south-east). Within a short drive, we also cover Beverley (6 miles north), Hornsea (15 miles north-east), Market Weighton (12 miles north-west), Brough (6 miles west), Hedon (10 miles east) and South Cave (7 miles west).
Landmarks near Willerby
Around Willerby, we work in homes near St Luke, Willerby Carr Lane Primary School and Hop Pole pub and the streets around them. For rail, the closest station is Cottingham station, about 2.1 miles north-east of the centre. Nearby you’ll also find St Stephen's (3.8 miles east) and Skidby Windmill And Museum of East Riding Life (2.2 miles north). Green spaces nearby include Far Ings National Nature Reserve.
Places near Willerby
What else we do in Willerby
About our accreditations · Every repair comes with a one-year guarantee.
