East Riding of Yorkshire · England
Bath Re-enamelling for Winestead homes
Bath re-enamelling for Winestead, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An old resurfacing that’s failing
When a repair isn’t the answer
Not everything can be repaired, and we’ll tell you before we start. We cannot fix:
- Plumbing leaks, which need a plumber
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Bath re-enamelling at your home in Winestead
We do not move the bath, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the next day. Whether it’s worn patches where water runs and sits and an original cast iron bath that needs restoring, we can usually put it right.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Area
- Winestead (HU12)
- County
- East Riding of Yorkshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Winestead
Other services in Winestead
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
How we price bath re-enamelling
Resurfacing from £350. You’ll know the full cost before booking. We take into account:
- Access to the area
- How much damage there is
- How many items we do on one visit
- The material and finish
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
We price nearly every job from pictures. This is what we need:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Natural light rather than flash
- Your postcode, so we can check dates
Send us pictures of the damage and a wider shot of the entire item, and tell us you’re in Winestead, and we’ll reply with a fixed quote.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Winestead as well as homeowners. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
- Mention if the room is upstairs or in a flat
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Read more
Repair or replace in Winestead?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why Winestead clients choose us
- One visit for most repairs
- We will tell you if it’s not worth repairing
- Dust sheets down, tidy finish
- No extra charge for your area
See our full price list or bath cost comparison.
Winestead: your questions answered
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
How do I get a price for bath re-enamelling in Winestead?
Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
How long is the bath unusable?
One day for most baths and can be used the day after. We will confirm timings when we quote.
What we’re called out for in Winestead
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Most people contact us after spotting something like this:
- A coloured bath you want in white
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
- Several chips and rust patches
Comparing quotes
- If travel is included in the price
- How the colour is matched
- When it can be used again
- What happens if they find more damage
Where we work around Winestead
Winestead is about 10 miles north of Grimsby, in East Riding of Yorkshire. Whether you are in the middle of Winestead or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Winestead is one of 299 places in East Riding of Yorkshire where we work. We work right across the region, from Winestead to Leeds (62 miles away).
We cover every part of HU12. Whether you live on Bydales Lane and Winestead Lane or anywhere nearby, we can come to you. We also travel to Ottringham (2 miles west), Halsham (2 miles north-west), Rimswell (3 miles north), Hollym (3 miles east) and Withernsea (3 miles north-east). Larger places within reach include Hornsea (15 miles north), Hedon (7 miles west), Preston (8 miles north-west), Keyingham (3 miles west), Bilton (10 miles north-west) and Thorngumbald (6 miles west).
What’s near Winestead
Locally, our jobs take us to homes close to Church of St Germain. Further afield, we also cover the area around Withernsea Lighthouse Museum (3.2 miles north-east) and Withernsea Hospital (3.2 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
