Warwickshire · England
Bath Re-enamelling in Outhill
Bath re-enamelling in and around Outhill: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Bath re-enamelling at your home in Outhill
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We regularly repair acrylic baths, basins & shower trays and cast iron baths, and the jobs we see most are chips and rust in more than one place and a bath in a colour that no longer suits.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Outhill (B80)
- Area hub
- Warwickshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Outhill
Housing associations and facilities teams use us for planned and reactive repairs in Warwickshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
What we’re called out for in Outhill
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Look out for any of the following:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
What to look for in a quote
- Whether there are any call-out or travel charges
- How the room is protected while they work
- How changes to the job are handled
- Whether the price is fixed and includes VAT
What bath re-enamelling costs
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- Doing more than one item at once
- Unusual colours or finishes
- How much damage there is
- How easy the damage is to reach
Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- A photo taken from further back
Most customers in Outhill get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to most of the day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
Getting a price
Send us pictures of the damage and a wider shot of the entire item, and tell us you are in Outhill, and we will reply with a fixed price.
Advice
Covering Outhill
Outhill is about 4 miles east of Redditch, in Warwickshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Outhill is one of 324 places in Warwickshire we cover. Our nearest city page is Birmingham, about 12 miles away.
Jobs in B80 work the same way as everywhere else we cover. If you’re just outside Outhill, we cover Mappleborough Green (1 mile west), Matchborough (2 miles west), Spernall (3 miles south), Studley (3 miles south-west) and Coughton (4 miles south-west). Within a short drive, we also cover Warwick (12 miles east), Royal Leamington Spa (14 miles east), Stratford-upon-Avon (9 miles south-east), Leamington Spa (13 miles east), Kenilworth (12 miles east) and Fordbridge (14 miles north).
What’s near Outhill
Typical jobs here are in homes near Church of the Holy Ascension, RSA Academy Arrow Vale and Mappleborough Green CofE Primary School and the streets around them. Outhill’s nearest station is Danzey station, about 2.4 miles north-east. Further afield, we also cover the area around Kingfisher Shopping Centre (3.8 miles west) and Alexandra Hospital (2.7 miles west). For a walk, there is Henley Sidings.
Common questions in Outhill
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
It’s been repaired before. Can you still fix it?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
How much does bath re-enamelling cost in Outhill?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Aftercare tips
Looking after the surface is easy:
- Dry the bath after use to stop limescale
- Respect the curing time we give you
- Never use suction bath mats
- Do not let dyes or oils sit on the finish
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
When a repair isn’t the answer
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Towns and villages near Outhill
Also in Outhill
About our accreditations · Every repair comes with a one-year guarantee.
