Hampshire · England
Bath Re-enamelling in Over Wallop
Full bath re-enamelling and resurfacing in Over Wallop, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
Questions from Over Wallop
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our bath re-enamelling in Over Wallop
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair Victorian roll-tops, acrylic baths and basins & shower trays, and people most frequently call us about a dull, rough surface that won’t come clean and a coating lifting around the plughole.
Whatever the size of the job, you get the same one-year guarantee in Over Wallop and across Hampshire.
- Where
- Over Wallop (SO20)
- Area hub
- Hampshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly before booking.
What we work on
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow most of the day. Before leaving, we tell you how long to leave it and how to care for it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the day after.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Read more
When to call us in Over Wallop
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
These are the problems we are asked about most:
- A dull, rough surface that will not come clean
- A bath in a colour that no longer suits
- Wear marks under the taps
- A coating lifting around the plughole
What to look for in a quote
- Whether the price is fixed and includes VAT
- The length of the guarantee and what it covers
- Who turns up on the day
- Aftercare advice
Keeping it looking good
Simple care helps the repair last. Our advice:
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
- Do not leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Work for landlords and builders
Landlords, letting agents and housing providers in Over Wallop use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What affects the price in Over Wallop
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Whether old repairs or coatings need taking off
- How much damage there is
- Whether we combine several jobs
- Where the damage is and how we get to it
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what helps:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- A wider photo showing the whole bath
- Details of any past repairs
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Places near Over Wallop
Also in Over Wallop
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Repairing versus replacing in Over Wallop
A replacement frequently means several trades over several days. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
What you get with us
- Rooms protected and left tidy
- Honest advice, even when it means no job
- Nothing taken out or refitted
- Technicians who travel to you, UK-wide
Take a look at our full price list and guide to resurfacing and replacement costs.
Over Wallop and nearby
Over Wallop is about 7 miles south-west of Andover, in Hampshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Over Wallop is one of 683 places in Hampshire we cover. We work right across the region, from Over Wallop to London (69 miles away).
Here we cover the SO20 postcode area. From Station Road, King Lane and King Lane Cottages or anywhere nearby, a technician can come to you. Other places close to Over Wallop include Middle Wallop (1 mile south-east), Kentsboro (2 miles north-east), Nether Wallop (2 miles south-east), Fox (3 miles north) and Amport (4 miles north). Within a short drive, we also cover Winchester (13 miles south-east), Andover (7 miles north-east), Chandler's Ford (14 miles south-east), Romsey (12 miles south-east), Hyde (13 miles south-east) and Tidworth (7 miles north-west).
What’s near Over Wallop
We visit homes around Wallop Primary School, Church of St Peter and The White Hart Inn, among other places. The nearest railway station is Grateley station, roughly 2 miles north-west of the centre. The countryside around Over Wallop includes Winterbourne Downs RSPB reserve and Quarley Hill.
About our accreditations · Every repair comes with a one-year guarantee.
