North Yorkshire · England
Bath re-enamelling & resurfacing in Ovington, North Yorkshire
Our repair technicians come to Ovington for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
About our bath re-enamelling in Ovington
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. We work on cast iron baths, basins & shower trays and acrylic baths, and the jobs we see most are a bath in a colour that no longer suits and enamel that’s lost its shine and feels rough.
All our work comes with our one-year guarantee.
- Where
- Ovington (DL11)
- Region
- North Yorkshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Ovington
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
The most common problems we’re called about are:
- Several chips and rust patches
- A coating lifting around the plughole
- Brown or grey marks that do not clean off
- Worn patches where water runs and sits
What your quote should include
- How long the guarantee is and what it covers
- What happens if the damage is worse than the pictures show
- When it can be used again
- Whether the price covers travel
Work for landlords and builders
We work for landlords, letting agents and housing providers in Ovington as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Repair or replace in Ovington?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. Our prices are the same across the UK, with no extra for Ovington. What changes the price is the job itself: the material, the amount of damage and how many items.
Why us?
- We leave the room as we found it
- Repair technicians who travel to you, UK-wide
- Colour-matched on site
- Nothing taken out or refitted
See our prices page or bath cost comparison.
Ovington: your questions answered
Which areas do you work in?
We cover the whole UK, including Ovington and the rest of North Yorkshire. Send your postcode with your photos and we’ll offer you dates.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can I get a quote without a visit?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
How do I get a price for bath re-enamelling in Ovington?
Resurfacing from £350. We give a fixed price based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
More services for Ovington
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Ovington. The price reflects:
- How many areas need work
- The colour and finish to match
- Whether we combine several jobs
- The material
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your pictures
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- What it’s made of, if you know
- A photo taken from further back
- Something in shot to show the size
- A close-up of the damage, in focus
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How it works
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. Allow most of the day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Mention any parking restrictions or tricky access
- Open a window if you can
- Tell us about any previous repairs or coatings
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
When a repair isn’t the answer
A repair is not always the answer, and we will tell you before we start. Repairs won’t solve:
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Ovington
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
About Ovington
Ovington is about 10 miles south-west of Bishop Auckland, in North Yorkshire. Clients in Ovington get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Ovington is one of 626 towns and villages in North Yorkshire we cover. We work right across the region, from Ovington to Newcastle upon Tyne (33 miles away).
Our technicians cover all of the DL11 postcode area. Nearby, we also work in Barforth (2 miles north-east), Gainford (3 miles north-east), Eppleby (3 miles east), Langton (4 miles north-east) and Ingleton (4 miles north-east). Larger places within reach include Catterick Garrison (11 miles south), Richmond (9 miles south), Colburn (11 miles south-east), Catterick (12 miles south-east), Leyburn (15 miles south) and Brompton-on-Swale (11 miles south-east).
Around Ovington
Typical jobs here are in homes near Church of St Mary. Other landmarks nearby include Raby Castle (4.4 miles north). Not far away are Newsham Tarn.
About our accreditations · Every repair comes with a one-year guarantee.
