Nottinghamshire · England
Bath Re-enamelling for Oxton Hill homes
Full bath re-enamelling and resurfacing at your home in Oxton Hill, with a one-year guarantee on every repair.
- Resurfacing from £350
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
About our bath re-enamelling in Oxton Hill
We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the following day. We work on cast iron baths, acrylic baths and Victorian roll-tops, and the jobs we see most are chips and rust in more than one place and a roll-top that’s seen better days.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Oxton Hill (NG25)
- County
- Nottinghamshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Oxton Hill
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can you fix a peeling bath coating?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long will the bath be out of use?
One day for most baths, ready the next day. We will confirm timings when we quote.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before you book.
What you get with us
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- Everything repaired in place
Read our full price list and bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Oxton Hill. The price comes down to:
- Access to the area
- How many areas need work
- Doing more than one item at once
- The material
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Send photos for a quote
You can normally get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- One picture of the entire bath
- A close-up of the damage, in focus
- Any details about the material
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
Where we work around Oxton Hill
Oxton Hill is about 6 miles north-east of Arnold, in Nottinghamshire. Wherever you are in the NG25 postcode area, we come to you. Oxton Hill is one of 329 places in Nottinghamshire we cover. You can also see our page for Birmingham, about 54 miles away.
Our visits in NG25 are booked in the same way as anywhere else. Neighbouring places we cover include Oxton (1 mile west), Epperstone (2 miles south), Calverton (3 miles south-west), Edingley (3 miles north-east) and Woodborough (3 miles south). Within a short drive, we also cover Mansfield (9 miles north-west), Beeston (13 miles south-west), Carlton (7 miles south), Sutton in Ashfield (10 miles north-west), Hucknall (7 miles west) and Newark-on-Trent (10 miles east).
Near you in Oxton Hill
Around Oxton Hill, we work in homes near St Peter & St Paul's Church, among other places. The nearest railway station is Thurgarton station, about 3.8 miles south-east. Other landmarks nearby include Lowdham Motte (3.5 miles south) and Calverton Folk Museum (2.6 miles south-west).
How it works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes most of the day, and we will tell you if anything changes.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Preparing for the visit
- Tell us about parking, stairs or access
- Make sure the area is dry
- Keep a parking space free if you can
Ask for a price
If you’re in Oxton Hill and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Common problems we fix in Oxton Hill
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- Enamel that’s lost its shine and feels rough
- Staining under the taps and around the waste
- Worn patches where water runs and sits
What your quote should include
- How soon you can use it again
- How changes to the job are handled
- The length of the guarantee and what it covers
- If travel is included in the price
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Oxton Hill
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Keeping it looking good
After the repair has cured, a few habits help it last:
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Places near Oxton Hill
Other services in Oxton Hill
About our accreditations · Every repair comes with a one-year guarantee.
