Swansea · Wales
Bath Re-enamelling for Parkmill homes
Our repair technicians come to Parkmill for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- Chips and rust in more than one place
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
How we handle bath re-enamelling in Parkmill
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the following day. We regularly repair basins & shower trays, pressed steel baths and cast iron baths, and the jobs we see most are several chips and rust patches and an outdated colour you’d like to change.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Parkmill (SA3)
- Area hub
- Swansea
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Parkmill
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you come to Parkmill?
Yes, we do. Technicians travel to Parkmill from across the region, with no extra charge for travel.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What happens once I’ve sent photos?
We come back with a fixed price, generally with dates to choose from. There’s no obligation to book.
Landlords, agents and businesses in Parkmill
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
How we price bath re-enamelling
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- The type of damage
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- The size and number of damaged areas
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
When we would advise against a repair
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Other services in Parkmill
About Parkmill
Parkmill is about 6 miles south of Gorseinon, in Swansea. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Parkmill is one of 153 towns and villages in Swansea we cover.
Every address in SA3 is within our area, from the main roads to the quietest streets. From Sandy Lane and Lunnon Close or anywhere nearby, a technician can come to you. We also cover the places around Parkmill: Lunnon (1 mile north-east), Sandylane (1 mile south-east), Southgate (1 mile south-east), Ilston (1 mile north-east) and Pennard (1 mile east). Within a short drive, we also cover Swansea (7 miles north-east), Castle (7 miles east), Morriston (10 miles north-east), Mount Pleasant (7 miles north-east), Gorseinon (6 miles north) and Dyfaty (7 miles north-east).
Local landmarks in Parkmill
Typical jobs here are in homes near Bishopston Comprehensive School, Pennard Primary School and Pennard Church of St Mary, among other places. Other landmarks nearby include Park Mill (under half a mile east) and Fairwood Hospital (3.2 miles north-east). For a walk, there’s Broad Pool and Cefn Bryn.
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why Parkmill customers choose us
- Everything repaired in place
- Colour mixed on the day to match
- One price list for the whole UK
- A year’s guarantee on all work
Read our prices page or bath cost comparison.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
When to call us in Parkmill
Many baths we resurface have simply been well used. The body of the bath is generally perfectly sound.
Send us a picture if you notice any of these:
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
- Thin, worn enamel in places
Comparing quotes
- How to care for the finish
- What the guarantee covers, and for how long
- What preparation is included
- Whether the price covers travel
How it works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
- Open a window if you can
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
