Greater London · England
Bath Re-enamelling in Peaks Hill
Full bath re-enamelling and resurfacing for homes and businesses in Peaks Hill and across Greater London. Send pictures for a free, fixed quote.
- Resurfacing from £350
- An outdated colour you’d like to change
- Brown or grey marks that don’t clean off
Bath re-enamelling at your home in Peaks Hill
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with enamel that’s lost its shine and feels rough and staining under the taps and around the waste, we can normally put it right.
Whatever the size of the job, it’s backed by a one-year guarantee in Peaks Hill and across Greater London.
- Location
- Peaks Hill (CR8, SM6)
- Region
- Greater London
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Peaks Hill
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
Places near Peaks Hill
More services for Peaks Hill
Peaks Hill questions
Are there extra charges for Peaks Hill?
No. Our quotes include travel, and we charge the same wherever you are.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Our work in Peaks Hill
Peaks Hill is about 1 mile north-west of Purley, in Greater London. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Peaks Hill is one of 764 towns and villages in Greater London we cover. Our nearest city page is London, about 11 miles away.
Every address in CR8 and SM6 is covered, from the main roads to the quietest streets. Local streets include Furze Lane, Birch Lane and Plough Lane, and we cover them all. Peaks Hill is on the A2022, which makes it straightforward to reach. We also travel to Russell Hill (1 mile north), Roundshaw (1 mile north), Woodcote (1 mile south-west), Purley (1 mile south-east) and Woodcote Green (1 mile west). We also work in nearby towns such as London (11 miles north), City of Westminster (12 miles north), Marylebone (12 miles north), Kensington (11 miles north), St Pancras (13 miles north) and Shoreditch (13 miles north).
What’s near Peaks Hill
Locally, our jobs take us to homes close to Church of St Mark, The Foxley Hatch pub and Margaret Roper Catholic Primary School. Nearby too are Coloma Convent Girls' School (under half a mile north-west), Laleham Lea School (under half a mile north-west) and Carshalton Park (1.8 miles north-west). The nearest railway station is Purley station, about 0.8 miles south-east of the centre. Nearby you’ll also find County Borough of Croydon (2.4 miles north-east) and Purley War Memorial Hospital (0.7 miles east). For a walk, there is Duppas Hill and Roundshaw Downs.
How it works
We agree an arrival time beforehand. Once we’re there, the work takes most of the day. The room is left tidy and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Read more
Why repair rather than replace?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day, with the bath back in use the day after. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Straight answers about what a repair can do
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your pictures
Take a look at our prices page or resurfacing vs replacement cost guide.
When to call us in Peaks Hill
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
These are the problems we are asked about most:
- Stains that will not shift
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
What to look for in a quote
- What aftercare is recommended
- What prep work is covered
- Whether the colour is mixed to match
- Whether the price covers travel
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
How to care for the repair
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- The type of damage
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- The material and finish
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
Good pictures mean an accurate price. Here’s what helps:
- Your postcode, so we can check dates
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- The material, if you know it
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
