Greater London · England
Bath re-enamelling & resurfacing in Roundshaw, Greater London
Local bath re-enamelling for Roundshaw: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that is seen better days
How it works
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a full day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
How we handle bath re-enamelling in Roundshaw
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We’re often asked to fix wear marks under the taps and stains that won’t shift, in basins & shower trays, Victorian roll-tops and pressed steel baths.
You are covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Location
- Roundshaw (SM6, CR8, CR0)
- Area hub
- Greater London
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Roundshaw
Many baths we resurface have simply been well used. The body of the bath is usually perfectly sound.
It’s worth getting a quote if you see:
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
Questions to ask before you book
- How long the guarantee is and what it covers
- Who will actually do the work
- What protection goes down before work starts
- Whether there are any call-out or travel charges
Repair or replace: which is better?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day, with the bath back in use the following day. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- Same prices wherever you are
Read our prices page or guide to resurfacing and replacement costs.
What affects the price in Roundshaw
Prices start from £350. Every quote is fixed and free. What we look at:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- How many areas need work
- What the surface is made of
Our prices are the same across the UK, so there’s no premium for Roundshaw. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
You can take the pictures on your phone. Ensure they show:
- A picture taken from further back
- Any details about the material
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
If you’re in Roundshaw and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Where we work around Roundshaw
Roundshaw is about 2 miles south-west of Croydon, in Greater London. Our technicians come to homes and businesses in Roundshaw, so you don’t need to take anything anywhere. Roundshaw is one of 764 towns and villages in Greater London we cover. You can also see our page for London, about 10 miles away.
Jobs in SM6, CR8 and CR0 work the same way as everywhere else we cover. We regularly work on streets such as Link Lane, Milton Road and Redwing Road and the roads around them. If you are just outside Roundshaw, we cover Russell Hill (1 mile east), Bandonhill (1 mile north), Peaks Hill (1 mile south), Waddon (1 mile north-east) and Wallington (1 mile north-west). Further out, we also cover London (10 miles north), City of Westminster (11 miles north), Marylebone (11 miles north), Kensington (11 miles north), St Pancras (12 miles north) and Shoreditch (12 miles north).
Near you in Roundshaw
In Roundshaw, that means homes near The Whispering Moon pub, Wallington Primary Academy and Waddon Ponds and the streets around them. Nearby too are Wilson's School (within half a mile north-east), The John Fisher School (0.6 miles south) and St. Paul's (less than half a mile south-west). The nearest railway station is Wallington station, about 0.9 miles north-west of the centre. Nearby you’ll also find St George's Walk (2 miles north-east) and Purley War Memorial Hospital (1.2 miles south-east). Green spaces nearby include Roundshaw Downs and Duppas Hill.
- Other local spots include County Borough of Croydon (1.9 miles north-east)
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
When a repair is not the answer
A repair is not right for every job, including:
- A bath that’s rusted through
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Towns and villages near Roundshaw
What else we do in Roundshaw
Roundshaw: your questions answered
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
How much does bath re-enamelling cost in Roundshaw?
Prices start from £350. Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item and your postcode.
Are there extra charges for Roundshaw?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Do you cover the whole of Greater London?
Across the UK, and that includes Roundshaw. Prices don’t change with location.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
About our accreditations · Every repair comes with a one-year guarantee.
