Walsall · England
Bath re-enamelling & resurfacing in Pelsall Wood, Walsall
We travel to Pelsall Wood for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A coloured bath you want in white
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Fix dripping taps quickly
- Have chips seen to early
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Bath re-enamelling at your home in Pelsall Wood
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, with the bath ready to use the following day. Typical jobs include staining under the taps and around the waste and a peeling or bubbling previous coating, in basins & shower trays, Victorian roll-tops and acrylic baths.
You get a one-year guarantee, the same in Pelsall Wood as everywhere else we work.
- Area
- Pelsall Wood (WS3)
- Region
- Walsall
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Pelsall Wood
More services for Pelsall Wood
About Pelsall Wood
Pelsall Wood is about 1 mile north-east of Bloxwich, in Walsall. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover 39 places in Walsall, from the larger towns to small villages. We work right across the region, from Pelsall Wood to Birmingham (about 12 miles away).
Postcode districts we cover here: WS3. That includes homes on Oak Road, Hall Lane and Wood Lane. Close by, we cover Pelsall (1 mile east), Little Bloxwich (1 mile west), Heath End (1 mile south-east), Blakenall Heath (1 mile south-west) and Shelfield (1 mile south-east). We also work in nearby towns such as Walsall (3 miles south), Willenhall (4 miles south-west), Aldridge (3 miles south-east), Caldmore (4 miles south), Chuckery (3 miles south) and Highgate (4 miles south).
Local landmarks in Pelsall Wood
We visit homes around St. Michael and All Angels Pelsall Parish Church, Pelsall Village School and Walsall Academy and the streets around them. You’ll also find The Red Cow pub (0.9 miles south-east) and Walsall Academy (0.9 miles south-west). The closest station to Pelsall Wood is Bloxwich station, roughly 1.6 miles south-west of the centre. Other landmarks nearby include Cheslyn Hay South (2.9 miles north-west) and Walsall Castle (3.4 miles south). Open spaces near Pelsall Wood include Bourne Pool and Pouk Hill.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We clean up when we are done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Avoid using the area for a few hours before we arrive
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
When a repair isn’t the answer
Before booking, it’s worth knowing the limits too:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Prices and what affects them
Prices start from £350. You will know the full cost before you book. We look at:
- The type of damage
- Whether we combine several jobs
- The material
- Previous DIY repairs that have to come out
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before booking.
Quotes from your pictures
Phone pictures are fine, there is no need for anything special. Ensure they show:
- Daylight if possible, and no flash reflection
- Details of any past repairs
- One sharp close-up of the damage
- A coin or ruler next to the damage for scale
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
FAQs for Pelsall Wood
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Pelsall Wood clients choose us
- No need to remove anything
- Typically one visit, start to finish
- Honest advice, even when it means no job
- Dust sheets down, tidy finish
See our full price list or bath cost comparison.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Signs you need bath re-enamelling in Pelsall Wood
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, generally first under the taps and around the waste.
The things customers generally mention when they call are:
- A period or roll-top bath worth keeping
- A dull, rough surface that will not come clean
- Wear marks under the taps
- An outdated colour you’d like to change
What to look for in a quote
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- Who turns up on the day
About our accreditations · Every repair comes with a one-year guarantee.
