Walsall · England
Bath Re-enamelling for Blakenall Heath homes
Full bath re-enamelling and resurfacing at your home in Blakenall Heath, with a one-year guarantee on every repair.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
What we do, step by step
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and we leave the room as we found it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Have a window or extractor fan available
How to get a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
Bath re-enamelling at your home in Blakenall Heath
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We work on cast iron baths, Victorian roll-tops and basins & shower trays, and common reasons people contact us are an old resurfacing that’s failing and enamel that’s lost its shine and feels rough.
We stand behind the work with a one-year guarantee.
- Location
- Blakenall Heath (WS3, WS2)
- County
- Walsall
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
What affects the price in Blakenall Heath
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- How easy the damage is to reach
- What the surface is made of
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Photographing the damage takes a minute. Try to send:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- Any details about the material
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Places near Blakenall Heath
Also in Blakenall Heath
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
Send us photos and we’ll tell you honestly.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Where we work around Blakenall Heath
Blakenall Heath is about 1 mile east of Bloxwich, in Walsall. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in all 39 towns and villages across Walsall. Our jobs stretch from Blakenall Heath to Birmingham (about 11 miles away).
All of WS3 and WS2 is covered. From Dee Road, Wye Road and Well Lane or a nearby road, a technician can come to you. With the A34 close by, Blakenall Heath is easy for our repair technicians to reach. Close by, we cover Leamore (1 mile south-west), Harden (1 mile south-east), Little Bloxwich (1 mile north), Heath End (1 mile east) and Pelsall Wood (1 mile north-east). Within a short drive, we also cover Brownhills (3 miles north-east), Aldridge (3 miles east), Caldmore (3 miles south), Highgate (3 miles south), Palfrey (3 miles south) and Yew Tree (4 miles south). Being one of Walsall’s larger places, Blakenall Heath sees plenty of our work.
Local landmarks in Blakenall Heath
Our customers here include homes close to Walsall Academy, Sunshine Infant and Nursery School and Christ Church. Nearby too are Walsall Academy (0.7 miles north), The Turf Tavern Public House And Attached Brewhouse (0.6 miles north-west) and Reedswood Park (1.5 miles south). Blakenall Heath’s nearest station is Bloxwich station, about 0.8 miles west. A little further out are Bloxwich Hospital (0.5 miles west) and Walsall Castle (2.1 miles south). Not far away are Pouk Hill and Bourne Pool.
Landlords, agents and businesses in Blakenall Heath
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Blakenall Heath: your questions answered
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help.
Do you cover the entire of Walsall?
We cover the whole UK, including Blakenall Heath and the rest of Walsall. Send your postcode with your photos and we will confirm dates.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
What we’re called out for in Blakenall Heath
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
People usually call us after spotting something like this:
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
- Wear marks under the taps
- Chips and rust in more than one place
Questions to ask before booking
- A fixed price, and whether VAT is included
- If travel is included in the price
- Who turns up on the day
- How long it needs to cure
About our accreditations · Every repair comes with a one-year guarantee.
